Page Comparison

Lab 1
2. Ressource management	Resources >
	Create an IP Pool: name: jlk-pool , subnet1 and subnet2 spine-loopback: 10.20.10.0/24 leaf-loopback: 10.20.30.0/24 external-route: 10.10.0.0/22
	Create ASN Pool: Name and range
	External Systems >
	Create External Router: Name IPv4@ ASN
3. Racks	Design > Rack Type
Single-Homed Rack Type	name connectivity type: L2 + Add Leafs: Name: & Leaf Logical Device: + Server: Name: & Logical Device: AOS-1x10-1 + Switch: name & map to the ToR switch
Dual-Homed Rack Type
4. Templates	Design > Templates
	Name: & Rack-Based
5. Device Management	Devices > Managed Devices
	Select the Devices >> Then Acknoloedge them
6. Blueprints	Blueprints >
Create a Blueprint	Name: & Select the template: jlk-xxxxx
Assign Ressources	Click on the template: selct the IP ools: jlk-pool, spine-loopback, leaf-loopback,
Assign Device Models	Select the Juniper vQFX Select the Server
Assign System IDs	spine1 >> 172.20.yoursubnet#.11 : 172.20.115.11 from cloudlabs.apstra.com Image Modified
Assign External Router Link
Assign SVI Subnet	then select virtual-networks ?????
Configure Default VRF	Staged > Virtual > Security Zones > Select the default VRF > Click "Add Connectivity Point"
Deploy Blueprint
7. Multitenancy
Virtual networks
Create Security Zone
Assign Connectivity to security Zone
Enable DHCP Server for Security Zone
Create VN: finance-www
Create VN: finance-app
Create Inter-rack vxLAB ( finance-db)
Assign resources to Virtual Networks
Deploy VxLANs
Check Server Connectivity
Check Inter-network Connecttivity

8. Configlets
Edit NTP Configlet
Apply NTP Cnfiglet
9. Intent-Based Analytics -Intro
Instantiate Predefined IBA Probe
Stopping and Stating IBA Probe
10. Root Cause Indentification
Enabling Connectivity RCI Fault Model

11. troubleshooting Scenario
Troubleshootinf Config Deviation

Versions Compared

Old Version 8

New Version Current

Key