...
| Lab 1 | |
|---|---|
| 2. Ressource management | Resources > |
Create an IP Pool:name name: jlk-pool , subnet1 and subnet2 spine-loopback: 10.20.10.0/24 leaf-loopback: 10.20.30.0/24 external-route: 10.10.0.0/22 | |
Create ASN Pool: Name and range | |
| External Systems > | |
Create External Router: Name IPv4@ ASN | |
| 3. Racks | Design > Rack Type |
| Single-Homed Rack Type | name connectivity type: L2 + Add Leafs: Name: & Leaf Logical Device: + Server: Name: & Logical Device: AOS-1x10-1 + Switch: name & map to the ToR switch |
| Dual-Homed Rack Type | |
| 4. Templates | Design > Templates |
| Name: & Rack-Based | |
| 5. Device Management | Devices > Managed Devices |
| Select the Devices >> Then Acknoloedge them | |
| 6. Blueprints | Blueprints > |
| Create a Blueprint | Name: & Select the template: jlk-xxxxx |
| Assign Ressources | Click on the template: selct the IP ools: jlk-pool, spine-loopback, leaf-loopback, |
| Assign Device Models | Select the Juniper vQFX Select the Server |
| Assign System IDs | |
| Assign External Router Link | |
| Assign SVI Subnet | |
| Configure Default VRF | |
| Deploy Blueprint | |
| 7. Multitenancy | |
| 8. Configlets | |
| 9. Intent-Based Analytics -Intro | |
| 10. Root Cause Indentification | |
| 11. troubleshooting Scenario | |
...