Page Comparison

Create your own Session Type and Service Class.

You will then apply an already configured Service Class to one of your Service Policies.

Next, you will apply a Traffic Profile to your wan1 interface on your Seattle Branch Router.

Image Added

Exercise 1	Traffic Classification
Step 1	Stream Video into your Branch 1 Client


Step 2	View Sessions


Step 4	Create New Service Class
	ADD next to Service Class. name: StreamingVideo DSCP Value: 31 Choice of Traffic Class or Priority Assignment: Use Traffic Class for Traffic Class to Assign: Medium Enable Rate Limiting: true 9. Set 1024 for Maximum Flow Rate 10. Set 2048 for Maximum Flow Burst

Step 3 ( I know )	Create New Session Type
	ADD next to Session Type name: RTSP Change the Session Timeout: 9000000 Select ADD next to Transport: TCP port 8554 Service Class: StreamingVideo

Step 5	Stream Video into your Branch 1 Client
	Maximum Flow Rate: 10000 Maximum Flow Burst: 10000

Step 6	Change Rate Limits in the Service Class


Step 7	Stream Video into your Branch 1 Client


Step 8	View Sessions


Step 9	Create Traffic Profile
Authority	ADD next to Traffic Profiles. Name: high_preference. 5. Set High to 80. 6. Set Medium to 17. 7. Set Low to 2. 8. Set Best Effort to 1.
seabo1 device interface called wan1	Image Added
Step 10	Stream Video into your Branch 1 Client


Step 11	Verify Traffic Engineering

Versions Compared