Page Comparison

...

Image Added

Create bridge on Proxmox

vmnet0: mgt ( default )

vmnet2: MPLS

vmnet3: Broadband

vmnet4: DC-subnet1 10.1.4.0/24 ( 10.dc_number.4.0/24)

vmnet5: DC-subnet2 10.1.5.0/24 ( 10.dc_number.5.0/24)

vmnet10: branch-subnet1 10.11.1.0/24 ( 10.1branch_number.1.0/24)

troubleshoot second interface down

vi /etc/network/interfaces and add the new vmbr2 and vmbr3

brctl show

Code Block

title	/etc/network/interfaces on ubuntu
collapse	true

root@hp8300:~# more /etc/network/interfaces
. . . 

auto lo
iface lo inet loopback

iface eno1 inet manual

iface enp2s0 inet manual

auto vmbr0
iface vmbr0 inet static
        address 192.168.0.9/24
        gateway 192.168.0.1
        bridge-ports eno1
        bridge-stp off
        bridge-fd 0

auto vmbr1
iface vmbr1 inet dhcp
        bridge-ports enp2s0
        bridge-stp off
        bridge-fd 0
#to SRX320

auto vmbr2
iface vmbr2 inet static
        address 192.168.92.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#mpls wan for 128T

auto vmbr3
iface vmbr3 inet static
        address 192.168.93.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#broadband wan for 128T
root@hp8300:~#

Code Block

title	brctl
collapse	true

root@hp8300:~# brctl show
bridge name     bridge id               STP enabled     interfaces
fwbr104i0               8000.aee1b2b65f0c       no              fwln104i0
                                                        tap104i0
fwbr104i1               8000.8e4895a4e437       no              fwln104i1
                                                        tap104i1
fwbr105i0               8000.feb11d5e0da4       no              fwln105i0
                                                        tap105i0
fwbr105i1               8000.be354291a932       no              fwln105i1
                                                        tap105i1
vmbr0           8000.6c3be5389335       no              eno1
vmbr1           8000.6805ca16086f       no              enp2s0
vmbr2           8000.000000000000       no
vmbr3           8000.000000000000       no

Image Removed

Create Conductor VM

KVM Proxmox

enable NUMA >>> may be not require!!!!

numa: 1 ( 0 disable )

Info / explain Link

doc: Link

Create Router VMs

Install 128t

t128 / 128tRoutes

sudo ip link set dev eth0 up

sudo dhclient

ip addr

systemctl start 128T

>> ISSUE

https://192.168.0.212

https://192.168.0.212/quick-start

...

Versions Compared

Old Version 13

New Version 14

Key