Page Comparison

Create bridge on Proxmox

vmnet0: wan1 for mgmt-Broanband ( default )

vmnet2: wan2 for MPLS

vmnet3: future use

vmnet4: lan1 in DC1-subnet1 10.1.4.0/24 ( 10.dc_number.4.0/24)

vmnet5: lan2 in DC1-subnet2 10.1.5.0/24 ( 10.dc_number.5.0/24)

vmnet11: lan1 branch1-subnet1 10.11.11.0/24 ( 10.1branch_number.11.0/24)

vmnet12: lan2 branch1-subnet2 10.11.12.0/24 ( 10.1branch_number.12.0/24)

troubleshoot second interface down

vi /etc/network/interfaces and add the new vmbr2 and vmbr3

Code Block

title	/etc/network/interfaces on ubuntu
collapse	true

root@hp8300:~# more /etc/network/interfaces
. . . 

auto lo
iface lo inet loopback

iface eno1 inet manual

iface enp2s0 inet manual

auto vmbr0
iface vmbr0 inet static
        address 192.168.0.9/24
        gateway 192.168.0.1
        bridge-ports eno1
        bridge-stp off
        bridge-fd 0

auto vmbr1
iface vmbr1 inet dhcp
        bridge-ports enp2s0
        bridge-stp off
        bridge-fd 0
#to SRX320

auto vmbr2
iface vmbr2 inet static
        address 192.168.92.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#wan1 MPLS for 128T

auto vmbr3
iface vmbr3 inet static
        address 192.168.93.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#wan2 Broadband for 128T

auto vmbr4
iface vmbr4 inet static
        address 10.1.4.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#lan1 service1 for 128T

auto vmbr5
iface vmbr5 inet static
        address 10.1.5.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#lan2 server2 for 128T

auto vmbr11
iface vmbr11 inet static
        address 10.10.11.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#lan1 branch1 for 128T

auto vmbr12
iface vmbr12 inet static
        address 10.10.12.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
#lan1 branch2 for 128T
root@hp8300:~#

bring the bridge up

brctl show >>> after creation the bridge are down ( look screenshot above )

ifup vmbr4

ifup vmbr5

ifup vmbr11

ifup vmbr12

Code Block

title	brctl
collapse	true

root@hp8300:~# brctl show
bridge name     bridge id               STP enabled     interfaces
fwbr104i0               8000.de1d18b636d8       no              fwln104i0
                                                        tap104i0
fwbr104i1               8000.5a2334bb6246       no              fwln104i1
                                                        tap104i1
fwbr105i0               8000.725c16ef867f       no              fwln105i0
                                                        tap105i0
fwbr105i1               8000.82028c6a1620       no              fwln105i1
                                                        tap105i1
fwbr105i2               8000.9e193329f381       no              fwln105i2
                                                        tap105i2
fwbr107i0               8000.a24bf9f3c51c       no              fwln107i0
                                                        tap107i0
fwbr107i1               8000.363654ec5fa0       no              fwln107i1
                                                        tap107i1
fwbr107i2               8000.5e55831c4beb       no              fwln107i2
                                                        tap107i2
fwbr107i3               8000.7e3ccd070384       no              fwln107i3
                                                        tap107i3
vmbr0           8000.6c3be5389335       no              eno1
                                                        fwpr104p0
                                                        fwpr105p0
                                                        fwpr107p0
                                                        fwpr107p3
vmbr1           8000.6805ca16086f       no              enp2s0
vmbr11          8000.000000000000       no
vmbr12          8000.000000000000       no
vmbr2           8000.62aeb72ced89       no              fwpr104p1
                                                        fwpr105p1
                                                        fwpr107p1
vmbr3           8000.4eb40554a69a       no              fwpr105p2
                                                        fwpr107p2
vmbr4           8000.000000000000       no
vmbr5           8000.000000000000       no

Create Conductor VM

KVM Proxmox

enable NUMA >>> may be not require!!!!

numa: 1 ( 0 disable )

Info / explain Link

doc: Link

Create Router VMs

DC

Interface naming convention ( E1000 driver )

nmcli nmtui

or in command line

more /etc/sysconfig/network-scripts/ifcfg-ens20

nmcli

nmcli connection

Code Block

title	nmcli
collapse	true

[t128@routerdc1_node1 ~]$ nmcli
ens18: connected to wan1_ens18
        "Intel 82540EM"
        ethernet (e1000), C6:E8:52:33:32:2C, hw, mtu 1500
        ip4 default
        inet4 192.168.0.217/24
        route4 0.0.0.0/0
        route4 192.168.0.0/24
        inet6 fe80::f63:1ec3:3e1a:8a5d/64
        route6 fe80::/64
        route6 ff00::/8

ens19: disconnected
        "Intel 82540EM"
        1 connection available
        ethernet (e1000), D6:D8:E9:6E:DE:3F, hw, mtu 1500

ens20: disconnected
        "Intel 82540EM"
        1 connection available
        ethernet (e1000), 5A:FE:25:3E:CD:0B, hw, mtu 1500

ens21: disconnected
        "Intel 82540EM"
        1 connection available
        ethernet (e1000), C6:23:C7:9B:85:B7, hw, mtu 1500

lo: unmanaged
        "lo"
        loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536

DNS configuration:
        servers: 192.168.0.1
        domains: Home
        interface: ens18

Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.

Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.


[t128@routerdc1_node1 ~]$ nmcli connection
NAME        UUID                                  TYPE      DEVICE
wan1_ens18  c49eb85a-7809-309a-811d-ee5e86e904bd  ethernet  ens18
lan1_ens20  0f27d46f-5483-365a-ab4f-51633ed667b9  ethernet  --
lan2_ens21  6ea0d133-50b9-3426-a853-67f7d5f93b66  ethernet  --
wan2_ens19  73d89cc8-c202-3213-82de-3cc613b9322c  ethernet  --

Install 128t

t128 / 128tRoutes

sudo ip link set dev eth0 up

sudo dhclient

ip addr

systemctl start 128T

>> ISSUE

https://192.168.0.212

https://192.168.0.212/quick-start

Onboard Router

on conductor

Create a Router:

1- new Router ( GPS coordinates + conductor IP@ + Inter-node Security Policy= "internal" )

2- New node: node1 or node2 ( Combo + No need for "Associated Asset ID", will be done automatically with quick-start file )

3- Device interface ( with PCI address or VMbus on Azure )

4- Network interface ( IP@ or DHCP, Security Policy: "Internal" + Neighborhoods= "wan1" + Hub ( DC ) or Spoke ( branch) )

5- Validate and Commit

6- Under Operation get the quick-start file and password

On the router

7-drag the quick-file file and copy the password in the router: https://x.x.x.x/quick-start

...

Versions Compared

Old Version 24

New Version 25

Key