...
Traffic Profile: https://docs.128technology.com/docs/config_reference_guide/#traffic-profile
Service Class:
| Mapping to a Traffic Class | |
|---|---|
1- Service Policy used and pointing to Service Class | Session > Service > Service Policy > Service Class |
| 2- or session-type use | Traffic matches a session-type ( destination port and protocol ) |
| 3- none of the above | it will be classified as best-effort treatment |
| Create Service Class | |
| Create Service Class |  |
Traffic Class DSCP ( for CoS in MPLS - no need for Broadband ) Aggregate Rate Limiting Flow Rate Limiting |
|
| Mapp Service to a Map a Service Policy to a Service Class | |
Mapping to a Traffic Class Session > Service > Service Policy > Service Class |
|
| |
| Traffic Profile ( for TE ) | 4x TE queues: high, medium, low, and best-effort. |
| |
High + Medium + Low + BE = 100% | |
| Apply Traffic Profile | |
| Apply to WAN device-interface | Enable TE and select the Traffic Profile Set Transmission capacity (specified in bps) to the upstream bandwidth (or possibly slightly below, say 95%)
|
...