| Conductor | using RPM 128T-installer ( no ISO file ) |
|---|---|
| 1. Launch a Linux command prompt. 2. sudo yum install http://yum.128technology.com/installer/repo.rpm 3. sudo yum install 128T-installer 4. sudo install128t 5. Press the enter key to select Begin and start the installation wizard. 6. When prompted, open the client certificate you received as part of your 128T purchase. Copy the entire contents, including the Certificate and Private key information, and paste it into the Client Certificate window of the install wizard. The content must begin with the line ----- BEGIN CERTIFICATE----- and end with ---- -END RSA PRIVATE KEY-----. 7. Press the tab key after pasting the client certificate to select the OK button, and hit enter. | |
| Step 0 | create a static IP address |
| nmtui | |
| |
| Step 1 | Deploy your 128T Conductor |
| install 128T Installer Repo | sudo yum install https://yum.128technology.com/installer/repo.rpm -y |
| install: 128T-installer | sudo yum install 128T-installer -y |
| cetificate | sudo mkdir -p /etc/pki/128technology wget https://yum.128technology.com/file/client_cert.pem sudo mv client_cert.pem /etc/pki/128technology/release.pem |
| start 128T Installer | sudo install128t |
| install the 5.1.3 ( 2021-06 ) | |
Select:
| |
| Node Role: Conductor Node Name: node1 ( hostname ) Conductor Name: nycconductor1 | |
| admin password: 128Tadmin | |
| reboot | |
| Step 2 | Name your Authority |
| Username: admin Password: 128Tadmin | |
Configuration menu > Authority Authority Name: CompanyX | |
| Conductor Location | https://www.gps-coordinates.net/ Pembrey Branch: +51.68748-004.27612/ ( GPS Location ) Newport DC: +51.58774-002.99834/ ( Conductor and DC router ) Marseille Branch: +43.296482+005.36978/ |
Page Comparison
General
Content
Integrations