Page Comparison

...

	Client	windows server
	iperf3 -c 10.1.4.10 ( default port 5001 )	iperf3 -s
1M of bandwidth	iperf3 -c 10.1.4.10 -b 1m	iperf3 -s
MSS of 100 ( did not work ) TCP maximum segment size (MSS)MSS of 100 ( did not work	iperf3 -c 10.1.4.10 -b 1m -M 100	iperf3 -s
MTU, or ‘Maximum Transmission Unit	The MSS is usually the MTU - 40 bytes for the TCP/IP header. The MSS is 1460 bytes (1500 byte MTU of the IP packet, or 1514 for ETH packet size). The MTU is the largest block of data that can be handled at layer-3 of the OSI model ( IP packet )
different port	iperf3 -c 10.1.4.10 -b 1m -M 100 -p 5123 iperf3 -c 10.1.4.10 -b 1m -M 100 -p 5124	iperf3 -s -p 5123 iperf3 -s -p 5124
UDP	iperf3 -c 10.1.4.10 -b 1m -M 100 -u	iperf3 -s -u
Small Vs Big packets
packet length	-t, --time # time in seconds to transmit for (default 10 secs) -n, --bytes #[KMG] number of bytes to transmit (instead of -t) -k, --blockcount #[KMG] number of blocks (packets) to transmit (instead of -t or -n) -l, --length #[KMG] length of buffer to read or write (default 128 KB for TCP, dynamic or 1460 for UDP) -P, --parallel # number of parallel client streams to run -M, --set-mss # set TCP/SCTP maximum segment size (MTU - 40 bytes)
Client & server	iperf3 -c 192.168.0.147 -b 100k -l 100 iperf3 -s

...

Versions Compared