Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...








Code Block
title999999
admin@node1.conductor# show service-path router branch1 node node1 service-name to-server1-icmp detail
Wed 2022-04-13 15:00:35 UTC

==========================
 Service: to-server1-icmp
==========================
  Service-Route:        to-server1-icmp__dc1
  Type:                 peer
  Destination:          192.168.92.21/32
  Next-Hop:             192.168.92.21, wan1-MPLS-NetwIF(Up)
  Peer:                 dc1
  Path-Metrics:
     latency [64ms] loss [0] jitter [0ms]
  Vector:               N/A  <<<<<<<<<<<<<<<<<<<<<<<< Why no vector
  Cost:                 999999  <<<<<<<<<<<<   not use unless the other link fail
  Rate:                 0
  Capacity:             1/unlimited
  Index:                5
  Meets-SLA:            Yes
  Prev-Meets-SLA:       Yes
  Reachability-Probes:  N/A

  Service-Route:        to-server1-icmp__dc1
  Type:                 peer
  Destination:          192.168.0.116/32
  Next-Hop:             192.168.0.116, wan0-mgmt(Up)(Does not meet the vector priority criteria)
  Peer:                 dc1
  Path-Metrics:
     latency [47ms] loss [0] jitter [0ms]
  Vector:               wan0-mgmt-vector
  Cost:                 N/A
  Rate:                 0
  Capacity:             1/unlimited
  Index:                25
  Meets-SLA:            Yes
  Prev-Meets-SLA:       Yes
  Reachability-Probes:  N/A

Completed in 0.05 seconds
admin@node1.conductor#


Solution

In the Service-policy ( attached to this service ) the vector was the wrong one

1- MPLS vector for EVE-NG

2- MPL Svector for Lanners direct connection