Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...




more /var/log/128T-bootstrap/128T-bootstrap.log


ERROR - cannot write defaults from encrypted quickstart file


Code Block
titleissue
[root@sn9103210032 ~]# more /var/log/128T-bootstrap/128T-bootstrap.log
2022-06-23 13:03:38,153 - root - INFO - Begin 128T bootstrapping
2022-06-23 13:03:38,159 - root - INFO - Found an identifier of: 9103210032
2022-06-23 13:03:38,160 - root - INFO - Found a hostname of: SN9103210032
2022-06-23 13:03:38,226 - root - INFO - Attempting to use usb device: /dev/sdb1
2022-06-23 13:03:38,405 - root - INFO - Mounted to: /media/bootstrap-usb
2022-06-23 13:03:38,405 - lib128.task - INFO - Executing task: Pre-Scriptlet
2022-06-23 13:03:38,406 - lib128.task - INFO - Executing task: Hostname
2022-06-23 13:03:38,423 - lib128.task - INFO - Executing task: Clock Sync
2022-06-23 13:10:56,501 - lib128.task - INFO - Executing task: Factory defaults
2022-06-23 13:10:56,503 - root - ERROR - cannot write defaults from encrypted qu
ickstart file
2022-06-23 13:10:56,503 - root - INFO - Attempting quickstart url: http://192.16
8.128.128/quickstart


SolutionUse a none-encrypted file







No IP address

connect to the console port and 

unplug the calble and plug it back


Image Added

ip a



16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
           link/ether 00:e0:ed:db:5a:0e brd ff:ff:ff:ff:ff:ff
           inet 192.168.0.115/24 brd 192.168.0.255 scope global noprefixroute dynamic enp2s0f0
                 valid_lft 86190sec preferred_lft 86190sec
          inet6 fe80::5b39:73b6:1455:dfd0/64 scope link noprefixroute
                  valid_lft forever preferred_lft forever

Code Block
titleip a
[root@sn9103210032 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: wwp0s21u1i8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 2a:99:55:8b:1f:a7 brd ff:ff:ff:ff:ff:ff
11: enp4s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:11 brd ff:ff:ff:ff:ff:ff
12: enp4s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:12 brd ff:ff:ff:ff:ff:ff
13: enp3s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:0f brd ff:ff:ff:ff:ff:ff
14: enp3s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:10 brd ff:ff:ff:ff:ff:ff
15: enp2s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:0d brd ff:ff:ff:ff:ff:ff
    inet6 fe80::2e0:edff:fedb:5a0d/64 scope link
       valid_lft forever preferred_lft forever
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:e0:ed:db:5a:0e brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.115/24 brd 192.168.0.255 scope global noprefixroute dynamic enp2s0f0
       valid_lft 86190sec preferred_lft 86190sec
    inet6 fe80::5b39:73b6:1455:dfd0/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
[root@sn9103210032 ~]#


ifcfg-enp2s0f0

ifcfg-enp2s0f1

more /etc/sysconfig/network-scripts/ifcfg-enp2s0f0 ( port label 2  on Madrid )   <<<<<<<<< This one

more /etc/sysconfig/network-scripts/ifcfg-enp2s0f  ( port label 1  on Madrid ) 

Code Block
titleip a
[root@sn9103210032 ~]# more /etc/sysconfig/network-scripts/ifcfg-enp2s0f1
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=enp2s0f1
UUID=3cc12cbe-6a40-44bd-8b98-f7ad34b7bbf0
DEVICE=enp2s0f1
BOOTPROTO=none
ONBOOT=no
NM_CONTROLLED=no
USERCTL=no