...
Session Type can be define ( mapped to Service Class ) but if Service policy ( exist will take priority ( and Service-policy which mapped to Service Class ) will take priority .
So Session Type will be for undefine traffic.
...
| Mapping to a Traffic Class | Session Type will be for undefine traffic in Service |
|---|---|
1- Service Policy used and pointing to Service Class | Session > Service > Service Policy > Service Class |
| 2- or session-type use | Traffic matches a session-type ( destination port and protocol )
|
| 3- none of the above | it will be classified as best-effort treatment |
| Create Service Class | |
| Create Service Class |  |
Traffic Class DSCP ( for CoS in MPLS - no need for Broadband ) Aggregate Rate Limiting Flow Rate Limiting |
|
| Map a Service Policy to a Service Class | |
Mapping to a Traffic Class Session > Service > Service Policy > Service Class |
|
| |
| Traffic Profile ( for TE ) | 4x TE queues: high, medium, low, and best-effort. |
| |
High + Medium + Low + BE = 100% | |
| Apply Traffic Profile | |
| Apply to WAN device-interface | Enable TE and select the Traffic Profile Set Transmission capacity (specified in bps) to the upstream bandwidth (or possibly slightly below, say 95%)
|
...