...
Payload encapsulation | ||||||
---|---|---|---|---|---|---|
Signaling | in ISAKMP ( IKE phase1 ) | |||||
1st/2nd packet | ||||||
in the 3rd and 4th packet | payload: NAT-Discovery | Compare the NAT-D ( IP@ + port) with the packet received | 2x NAT-D ( 1st= remote IP@/port and 2nd= local IP@/port) >> solve the questions: direction and existance of NAT . If both ends calculate those hashes and get same result, they know there is no NAT between. If the hashes do not match, somebody has translated the address or port. | |||
|
NAT-T for IKE peer: NAT-T is used when there is a network device between the two tunnel end-points that enforce NAT.
all the IPSEC tunnerl to traverse the NATing equipement
Challenge: Any changes to the IP addressing, which is the function of NAT, causes IKE to discard packets
Solution: ESP over UDP/4500
After detecting one or more NAT devices ( by the firwall) along the datapath during Phase 1 exchanges,
>> NAT-T adds a layer of User Datagram Protocol (UDP) encapsulation to IPsec packets so they are not discarded after address translation.
edit security ike gateway gateway-name
[edit security ike gateway IKE-GW1]
...