Versions Compared

Old Version 1

changes.mady.by.user Jean-luc KRIKER

Saved on

compared with

New Version 2

changes.mady.by.user Jean-luc KRIKER

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.






Code Block
titlecpu
root@EX4300-R103-34> show chassis routing-engine
Routing Engine status:
  Slot 0:
    Current state                  Master
    Temperature                 53 degrees C / 127 degrees F
    CPU temperature             53 degrees C / 127 degrees F
    DRAM                      2048 MB
    Memory utilization          58 percent
    5 sec CPU utilization:
      User                       1 percent
      Background                 0 percent
      Kernel                     2 percent
      Interrupt                  0 percent
      Idle                      97 percent
    Model                          EX4300-48T
    Serial ID                      PE3717290399
    Start time                     2019-01-19 08:56:34 UTC
    Uptime                         14 days, 1 hour, 52 minutes, 58 seconds
    Last reboot reason             0x1:power cycle/failure
    Load averages:                 1 minute   5 minute  15 minute
                                       0.10       0.07       0.02






Code Block
titleenviromenent

{master:0}
root@EX4300-R103-34> show chassis environment
Class Item                           Status     Measurement
Power FPC 0 Power Supply 0           OK
      FPC 0 Power Supply 1           Absent
Temp  FPC 0 CPU                      OK         54 degrees C / 129 degrees F
      FPC 0 NW-PFE                   OK         41 degrees C / 105 degrees F
      FPC 0 SE-PFE                   OK         40 degrees C / 104 degrees F
      FPC 0 PHY-2/3                  OK         35 degrees C / 95 degrees F
      FPC 0 MGMT PHY                 OK         44 degrees C / 111 degrees F
      FPC 0 PHY-4/5                  OK         38 degrees C / 100 degrees F
Fans  FPC 0 Fan 0                    OK         Spinning at normal speed
      FPC 0 Fan 0 Airflow            OK         Airflow Out (AFO)
      FPC 0 Fan 1                    OK         Spinning at normal speed
      FPC 0 Fan 1 Airflow            OK         Airflow Out (AFO)