Versions Compared

Old Version 1

changes.mady.by.user Jean-luc KRIKER

Saved on

compared with

New Version 2

changes.mady.by.user Jean-luc KRIKER

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

set ethernet connectivity-fault-management linktrace
set ethernet connectivity-fault-management maintenance-domain md7 level 7
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 continuity-check interval 10s
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 continuity-check hold-interval 1
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 2001 interface ge-0/0/1.0
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 2001 direction down
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 2001 auto-discovery


Client Side:

set ethernet connectivity-fault-management linktrace
set ethernet connectivity-fault-management maintenance-domain md7 level 7
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 continuity-check interval 10s
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 continuity-check hold-interval 1
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 101 interface ge-0/0/1.0
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 101 direction down
set ethernet connectivity-fault-management maintenance-domain md7 maintenance-association ma7 mep 101 auto-discovery

set twamp client control-connection Reflector1 destination-port 10862
set twamp client control-connection Reflector1 routing-instance Edu
set twamp client control-connection Reflector1 target-address 192.168.1.2
set twamp client control-connection Reflector1 test-count 0
set twamp client control-connection Reflector1 test-interval 10
set twamp client control-connection Reflector1 test-session Class1 target-address 192.168.1.2
set twamp client control-connection Reflector1 test-session Class1 dscp-code-points ef
set twamp client control-connection Reflector1 test-session Class2 target-address 192.168.1.2
set twamp client control-connection Reflector1 test-session Class2 dscp-code-points af41