Encapsulation (Physical Interface)
...
| Code Block | ||
|---|---|---|
| ||
root@QFX5110-2# set interfaces ge-0/0/13 encapsulation ?
Possible completions:
ethernet-bridge Ethernet layer-2 bridging
ethernet-ccc Ethernet cross-connect
extended-vlan-bridge VLAN layer-2 bridging
flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration
vlan-ccc 802.1q tagging for a cross-connect
{master:0}[edit]
Model: ex9208 , Junos: 14.2R4.9
root@EX9208-1-RE1# set encapsulation ?
Possible completions:
ethernet-bridge Ethernet layer-2 bridging
ethernet-vpls Ethernet virtual private LAN service
extended-vlan-bridge VLAN layer-2 bridging
extended-vlan-vpls Extended VLAN virtual private LAN service
flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration
vlan-vpls VLAN virtual private LAN service
|
ethernet-bridge—Use Ethernet bridge encapsulation on Ethernet interfaces that have bridging enabled and that must accept all packets.
ethernet-ccc—Use Ethernet CCC encapsulation on Ethernet interfaces that must accept packets carrying standard Tag Protocol ID (TPID) values.
vlan-ccc—Use VLAN CCC encapsulation on Ethernet interfaces with VLAN tagging enabled. VLAN CCC encapsulation supports TPID 0x8100 only. You must configure this encapsulation type on both the physical interface and the logical interface.
extended-vlan-bridge—Use extended VLAN bridge encapsulation on Ethernet interfaces that have IEEE 802.1Q VLAN tagging and bridging enabled and that must accept packets carrying TPID 0x8100 or a user-defined TPID.
flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration
...
| Code Block | ||
|---|---|---|
| ||
root@QFX5110-2# set interfaces ge-0/0/13.20 encapsulation ? Possible completions: dix Ethernet DIXv2 (RFC 894) ppp-over-ether PPPoE encapsulation vlan-bridge VLAN layer-2 bridging vlan-ccc 802.1q tagging for a cross-connect vlan-vpls VLAN virtual private LAN service |
vlan-bridge—Use Ethernet VLAN bridge encapsulation on Ethernet interfaces that have IEEE 802.1Q tagging, flexible-ethernet-services, and bridging enabled and that must accept packets carrying TPID 0x8100 or a user-defined TPID.
vlan-ccc—Use Ethernet virtual LAN (VLAN) encapsulation on CCC circuits. When you use this encapsulation type, you can configure the ccc family only.