https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/family-edit-interfaces.html
Family bridge is used when you want a port that has more than one logical unit, each with the same or different encapsulations. Bridge domains are associated with GRE interface with the corresponding BD VLAN.
| Code Block |
|---|
| root@EX9208-1-RE1# set interfaces ge-1/0/1.100 family ?
Possible completions:
> ethernet-switching Ethernet switching parameters
> inet IPv4 parameters
> inet6 IPv6 protocol parameters
> iso OSI ISO protocol parameters
> mpls MPLS protocol parameters
> vpls Virtual private LAN service parameters
[edit]
|
|
|---|
|
| Code Block |
|---|
| root@QFX5110-2# set interfaces ge-0/0/0.100 family ?
Possible completions:
> ccc Circuit cross-connect parameters
> ethernet-switching Ethernet switching parameters
> inet IPv4 parameters
> inet6 IPv6 protocol parameters
> iso OSI ISO protocol parameters
> mpls MPLS protocol parameters
> vpls Virtual private LAN service parameters
{master:0}[edit]
|
|
|
...