Page Comparison

...

Code Block

title	IP and BGP configuration cmds
collapse	true

interface Ethernet3Ethernet1
   no switchport
   ip address 10.1.2.1/30
!
interface Loopback0
   ip address 10.0.0.1/32
!
ip routing
!
router bgp 65000
   router-id 10.0.0.1
   neighbor 10.1.2.2 remote-as 65000
   neighbor 10.1.2.2 maximum-routes 12000
   network 10.0.0.1/32
!

...

Code Block

title	show BGP commands
collapse	true

spine01#show ip bgp summary
BGP summary information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Neighbor Status Codes: m - Under maintenance
  Neighbor         V  AS           MsgRcvd   MsgSent  InQ OutQ  Up/Down State  PfxRcd PfxAcc
  10.1.2.2         4  65000             39        44    0    0 00:34:00 Estab  1      1



spine01#show ip bgp neighbors
BGP neighbor is 10.1.2.2, remote AS 65000, internal link
  BGP version 4, remote router ID 10.0.0.2, VRF default
  Negotiated BGP version 4
  Last read 00:00:10, last write 00:00:10
  Hold time is 180, keepalive interval is 60 seconds
  Configured hold time is 180, keepalive interval is 60 seconds
  Connect timer is inactive
  Idle-restart timer is inactive
  BGP state is Established, up for 00:35:10
. . . .


spine01#show ip bgp neighbors 10.1.2.2 routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.2/32            10.1.2.2              0       100     0      i


spine01#show ip bgp neighbors 10.1.2.2 advertised-routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast, q - Queued for advertisement
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.1/32            10.1.2.1              -       100     -      i


spine01#show ip bgp neighbors 10.1.2.2 received-routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.2/32            10.1.2.2              -       100     -      i

show ip route

Code Block

title	show ip route
collapse	true


localhost#show ip route

VRF: default
Codes: C - connected, S - static, K - kernel,
       O - OSPF, IA - OSPF inter area, E1 - OSPF external type 1,
       E2 - OSPF external type 2, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type2, B I - iBGP, B E - eBGP,
       R - RIP, I L1 - IS-IS level 1, I L2 - IS-IS level 2,
       O3 - OSPFv3, A B - BGP Aggregate, A O - OSPF Summary,
       NG - Nexthop Group Static Route, V - VXLAN Control Service,
       DH - Dhcp client installed default route

Gateway of last resort:
 K      0.0.0.0/0 [40/0] via 10.0.2.2, Management1

 B I    10.0.0.1/32 [200/0] via 10.1.2.1, Ethernet1
 C      10.0.0.2/32 is directly connected, Loopback0
 C      10.0.2.0/24 is directly connected, Management1
 C      10.1.2.0/30 is directly connected, Ethernet1



localhost#show ip route bgp

VRF: default
Codes: C - connected, S - static, K - kernel,
       O - OSPF, IA - OSPF inter area, E1 - OSPF external type 1,
       E2 - OSPF external type 2, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type2, B I - iBGP, B E - eBGP,
       R - RIP, I L1 - IS-IS level 1, I L2 - IS-IS level 2,
       O3 - OSPFv3, A B - BGP Aggregate, A O - OSPF Summary,
       NG - Nexthop Group Static Route, V - VXLAN Control Service,
       DH - Dhcp client installed default route

 B I    10.0.0.1/32 [200/0] via 10.1.2.1, Ethernet1

Versions Compared

Old Version 10

New Version 11

Key