Page Comparison

...

rpc commands

show

looking for the rate on an interface

Code Block

title	show

jcluser@vMX-addr-5> show interfaces ge-0/0/3.0 detail | match bps
     Input  bytes  :               503550                 3912 bps
     Output bytes  :               523272                 4144 bps

rpc command

Code Block

title	rpc command

jcluser@vMX-addr-5> show interfaces ge-0/0/3.0 detail | display xml rpc
<rpc-reply xmlns:junos="http://xml.juniper.net/junos/18.3R1/junos">
    <rpc>
        <get-interface-information>
                <detail/>
                <interface-name>ge-0/0/3.0</interface-name>
        </get-interface-information>
    </rpc>
    <cli>
        <banner></banner>
    </cli>
</rpc-reply>

show in xml format

<logical-interface>

<transit-traffic-statistics>

<input-bps>1128</input-bps>

<output-bps>1128</output-bps>

Code Block

title	show in xml format
collapse	true

jcluser@vMX-addr-5> show interfaces ge-0/0/3.0 detail | display xml
<rpc-reply xmlns:junos="http://xml.juniper.net/junos/18.3R1/junos">
    <interface-information xmlns="http://xml.juniper.net/junos/18.3R1/junos-interface" junos:style="normal">
        <logical-interface>
            <name>ge-0/0/3.0</name>
            <local-index>335</local-index>
            <snmp-index>537</snmp-index>
            <generation>144</generation>
            <if-config-flags>
                <iff-up/>
                <iff-snmp-traps/>
                <internal-flags>0x4004000</internal-flags>
            </if-config-flags>
            <encapsulation>ENET2</encapsulation>
            <policer-overhead>
            </policer-overhead>
            <traffic-statistics junos:style="verbose" junos:indent="2" >
                <input-bytes>890256</input-bytes>
                <output-bytes>1040970</output-bytes>
                <input-packets>11762</input-packets>
                <output-packets>12249</output-packets>
            </traffic-statistics>
            <local-traffic-statistics>
                <input-bytes>270795</input-bytes>
                <output-bytes>399696</output-bytes>
                <input-packets>3830</input-packets>
                <output-packets>4094</output-packets>
            </local-traffic-statistics>
            <transit-traffic-statistics>
                <input-bytes>619461</input-bytes>
                <input-bps>1128</input-bps>
                <output-bytes>641274</output-bytes>
                <output-bps>1128</output-bps>
                <input-packets>7932</input-packets>
                <input-pps>2</input-pps>
                <output-packets>8155</output-packets>
                <output-pps>1</output-pps>
            </transit-traffic-statistics>
            <filter-information>
            </filter-information>
            <address-family>
                <address-family-name>inet</address-family-name>
                <mtu>1500</mtu>
                <max-local-cache>75000</max-local-cache>
                <new-hold-limit>75000</new-hold-limit>
                <intf-curr-cnt>1</intf-curr-cnt>
                <intf-unresolved-cnt>0</intf-unresolved-cnt>
                <intf-dropcnt>0</intf-dropcnt>
                <generation>170</generation>
                <route-table>0</route-table>
                <address-family-flags>
                    <ifff-sendbcast-pkt-to-re/>
                    <internal-flags>0x0</internal-flags>
                </address-family-flags>
                <filter-information>
                </filter-information>
                <policer-information>
                </policer-information>
                <interface-address>
                    <ifa-flags>
                        <ifaf-current-preferred/>
                        <ifaf-current-primary/>
                    </ifa-flags>
                    <ifa-destination>7.105.106.0/30</ifa-destination>
                    <ifa-local>7.105.106.1</ifa-local>
                    <ifa-broadcast>7.105.106.3</ifa-broadcast>
                    <generation>146</generation>
                </interface-address>
            </address-family>
            <address-family>
                <address-family-name>iso</address-family-name>
                <mtu>1497</mtu>
                <generation>171</generation>
                <route-table>0</route-table>
                <address-family-flags>
                    <internal-flags>0x0</internal-flags>
                </address-family-flags>
            </address-family>
            <address-family>
                <address-family-name>mpls</address-family-name>
                <mtu>1488</mtu>
                <maximum-labels>3</maximum-labels>
                <generation>172</generation>
                <route-table>0</route-table>
                <address-family-flags>
                    <internal-flags>0x10000000</internal-flags>
                </address-family-flags>
            </address-family>
            <address-family>
                <address-family-name>multiservice</address-family-name>
                <mtu>Unlimited</mtu>
                <generation>173</generation>
                <route-table>0</route-table>
                <address-family-flags>
                    <internal-flags>0x0</internal-flags>
                </address-family-flags>
                <filter-information>
                </filter-information>
                <policer-information>
                    <policer-input>__default_arp_policer__</policer-input>
                </policer-information>
            </address-family>
        </logical-interface>
    </interface-information>
    <cli>
        <banner></banner>
    </cli>
</rpc-reply>

jcluser@vMX-addr-5>

rpc test on the junos router

and

traffic-statistics.yml

jcluser@vMX-addr-5> netconf

Code Block

title	rpc command
collapse	true

jcluser@ubuntu:/var/local/healthbot/input$ more traffic-statistics.yml
---
SystemStatisticsTable:
    rpc: get-pfe-statistics
    item: pfe-traffic-statistics
    key: pfe-input-packets
    view: PFEStatisticsView <<<<<<<<<<<<< Next line
PFEStatisticsView:
    fields:
        pfe-input-packets: pfe-input-packets
        pfe-output-packets: pfe-output-packets


jcluser@vMX-addr-5> show pfe statistics traffic | display xml rpc
<rpc-reply xmlns:junos="http://xml.juniper.net/junos/18.3R1/junos">
    <rpc>
        <get-pfe-statistics>       <<<<<<<<<<<<<<<<<<<< RPC commands:    rpc: get-pfe-statistics
        </get-pfe-statistics>
    </rpc>


jcluser@vMX-addr-5> show pfe statistics traffic | display xml
<rpc-reply xmlns:junos="http://xml.juniper.net/junos/18.3R1/junos">
    <pfe-statistics>
        <pfe-traffic-statistics>        <<<<<<<<<<<<<<<<<<<<< Start here:  item: pfe-traffic-statistics   and key:  pfe-input-packets
            <pfe-input-packets>72823</pfe-input-packets>   <<<<<<<<< Value of interest : pfe-input-packets: pfe-input-packets
            <input-pps>6</input-pps>
            <pfe-output-packets>74923</pfe-output-packets>   <<<<<<<<< value of interest: pfe-output-packets: pfe-output-packets
            <output-pps>5</output-pps>
            <pfe-fabric-input>0</pfe-fabric-input>
            <pfe-fabric-input-pps>0</pfe-fabric-input-pps>
            <pfe-fabric-output>0</pfe-fabric-output>
            <pfe-fabric-output-pps>0</pfe-fabric-output-pps>
        </pfe-traffic-statistics>
        <pfe-local-traffic-statistics>
            <pfe-input-packets>35585</pfe-input-packets>
            <pfe-output-packets>75594</pfe-output-packets>
            <software-input-control-drops>0</software-input-control-drops>
            <software-input-high-drops>0</software-input-high-drops>
            <software-input-medium-drops>0</software-input-medium-drops>
            <software-input-low-drops>0</software-input-low-drops>
            <software-output-low-drops>0</software-output-low-drops>
            <hardware-input-drops>0</hardware-input-drops>
        </pfe-local-traffic-statistics>
        <pfe-local-protocol-statistics>
            <hdlc-keepalive-count>0</hdlc-keepalive-count>
            <atm-oam-count>0</atm-oam-count>
            <fr-lmi-count>0</fr-lmi-count>
            <ppp-lcp-ncp-count>0</ppp-lcp-ncp-count>
            <ospf-hello-count>0</ospf-hello-count>
            <ospf3-hello-count>0</ospf3-hello-count>
            <rsvp-hello-count>13543</rsvp-hello-count>
            <ldp-hello-count>0</ldp-hello-count>
            <bfd-count>0</bfd-count>
            <isis-iih-count>7910</isis-iih-count>
            <lacp-count>0</lacp-count>
            <arp-count>89</arp-count>
            <ether-oam-count>0</ether-oam-count>
            <unknown-count>0</unknown-count>
        </pfe-local-protocol-statistics>
        <pfe-hardware-discard-statistics>
            <timeout-discard>0</timeout-discard>
            <truncated-key-discard>0</truncated-key-discard>
            <bits-to-test-discard>0</bits-to-test-discard>
            <data-error-discard>0</data-error-discard>
            <tcp-header-error-discard>0</tcp-header-error-discard>
            <stack-underflow-discard>0</stack-underflow-discard>
            <stack-overflow-discard>0</stack-overflow-discard>
            <bad-route-discard>111</bad-route-discard>
            <nexthop-discard>0</nexthop-discard>
            <invalid-iif-discard>0</invalid-iif-discard>
            <info-cell-discard>0</info-cell-discard>
            <fabric-discard>0</fabric-discard>
        </pfe-hardware-discard-statistics>
        <pfe-chip-statistics>
            <input-checksum>0</input-checksum>
            <output-mtu>0</output-mtu>
        </pfe-chip-statistics>
    </pfe-statistics>


===============================================================================================================================
Local netconf
-------------

jcluser@vMX-addr-5> netconf
<!-- No zombies were killed during the creation of this user interface -->
<!-- user jcluser, class j-super-user -->
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
    <capability>urn:ietf:params:netconf:capability:candidate:1.0</capability>
    <capability>urn:ietf:params:netconf:capability:confirmed-commit:1.0</capability>
    <capability>urn:ietf:params:netconf:capability:validate:1.0</capability>
    <capability>urn:ietf:params:netconf:capability:url:1.0?scheme=http,ftp,file</capability>
    <capability>urn:ietf:params:xml:ns:netconf:base:1.0</capability>
    <capability>urn:ietf:params:xml:ns:netconf:capability:candidate:1.0</capability>
    <capability>urn:ietf:params:xml:ns:netconf:capability:confirmed-commit:1.0</capability>
    <capability>urn:ietf:params:xml:ns:netconf:capability:validate:1.0</capability>
    <capability>urn:ietf:params:xml:ns:netconf:capability:url:1.0?protocol=http,ftp,file</capability>
    <capability>urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring</capability>
    <capability>http://xml.juniper.net/netconf/junos/1.0</capability>
    <capability>http://xml.juniper.net/dmi/system/1.0</capability>
  </capabilities>
  <session-id>8927</session-id>
</hello>
]]>]]>
<rpc><get-pfe-statistics/>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:junos="http://xml.juniper.net/junos/18.3R1/junos">
<pfe-statistics>
<pfe-traffic-statistics>                  <<<<<<<<<<<<<<<<<<<<< Start here:  item: pfe-traffic-statistics   and key:  pfe-input-packets
<pfe-input-packets>67819</pfe-input-packets>    <<<<<<<<< Value of interest : pfe-input-packets: pfe-input-packets
<input-pps>4</input-pps>
<pfe-output-packets>69769</pfe-output-packets>      <<<<<<<<< value of interest: pfe-output-packets: pfe-output-packets
<output-pps>4</output-pps>
<pfe-fabric-input>0</pfe-fabric-input>
<pfe-fabric-input-pps>0</pfe-fabric-input-pps>
<pfe-fabric-output>0</pfe-fabric-output>
<pfe-fabric-output-pps>0</pfe-fabric-output-pps>
</pfe-traffic-statistics>             <<<<<<<<<<<<<<<<<<<<< Finish here:
<pfe-local-traffic-statistics>
<pfe-input-packets>33262</pfe-input-packets>
<pfe-output-packets>70654</pfe-output-packets>
<software-input-control-drops>0</software-input-control-drops>
<software-input-high-drops>0</software-input-high-drops>
<software-input-medium-drops>0</software-input-medium-drops>
<software-input-low-drops>0</software-input-low-drops>
<software-output-low-drops>0</software-output-low-drops>
<hardware-input-drops>0</hardware-input-drops>
</pfe-local-traffic-statistics>
<pfe-local-protocol-statistics>
<hdlc-keepalive-count>0</hdlc-keepalive-count>
<atm-oam-count>0</atm-oam-count>
<fr-lmi-count>0</fr-lmi-count>
<ppp-lcp-ncp-count>0</ppp-lcp-ncp-count>
<ospf-hello-count>0</ospf-hello-count>
<ospf3-hello-count>0</ospf3-hello-count>
<rsvp-hello-count>12642</rsvp-hello-count>
<ldp-hello-count>0</ldp-hello-count>
<bfd-count>0</bfd-count>
<isis-iih-count>7395</isis-iih-count>
<lacp-count>0</lacp-count>
<arp-count>85</arp-count>
<ether-oam-count>0</ether-oam-count>
<unknown-count>0</unknown-count>
</pfe-local-protocol-statistics>
<pfe-hardware-discard-statistics>
<timeout-discard>0</timeout-discard>
<truncated-key-discard>0</truncated-key-discard>
<bits-to-test-discard>0</bits-to-test-discard>
<data-error-discard>0</data-error-discard>
<tcp-header-error-discard>0</tcp-header-error-discard>
<stack-underflow-discard>0</stack-underflow-discard>
<stack-overflow-discard>0</stack-overflow-discard>
<bad-route-discard>111</bad-route-discard>
<nexthop-discard>0</nexthop-discard>
<invalid-iif-discard>0</invalid-iif-discard>
<info-cell-discard>0</info-cell-discard>
<fabric-discard>0</fabric-discard>
</pfe-hardware-discard-statistics>
<pfe-chip-statistics>
<input-checksum>0</input-checksum>
<output-mtu>0</output-mtu>
</pfe-chip-statistics>
</pfe-statistics>
<rpc/>
<rpc-error>
<error-type>protocol</error-type>
<error-tag>operation-failed</error-tag>
<error-severity>error</error-severity>
<error-message>syntax error, expecting </rpc></error-message>
<error-info>
<bad-element>rpc</bad-element>
</error-info>
</rpc-error>
<rpc><close-session/>

icmp_statistics.yml

Code Block

title	icmp stat
collapse	true

jcluser@ubuntu:/var/local/healthbot/input$ more icmp_statistics.yml
---
pingTable:
    rpc: ping
    args:
        count: Null
        host: Null
    key: ../target-host
    item: probe-results-summary
    view: pingView
pingView:
    fields:
        host-ip: ../target-host
        probes-sent: probes-sent
        responses-received: responses-received
        packet-loss: packet-loss
        rtt-minimum: rtt-minimum
        rtt-maximum: rtt-maximum
        rtt-average: rtt-average
        rtt-stddev: rtt-stddev

Versions Compared

Old Version 6

New Version 7

Key