Versions Compared

Old Version 2

changes.mady.by.user Jean-luc KRIKER

Saved on

compared with

New Version Current

changes.mady.by.user Jean-luc KRIKER

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.




snmp on the swtich



Code Block
titlesnmp
conf term

snmp-server enable traps
snmp-server community public ro
snmp-server community private rw

end

copy running-config startup-config


Test snmpwalk:

snmpwalk on centos




Code Block
titleintrface
Switch#show ip interface brief | include up
GigabitEthernet0/1     unassigned      YES unset  up                    up
GigabitEthernet0/2     unassigned      YES unset  up                    up
GigabitEthernet0/48    100.123.231.2   YES manual up                    up


LLDP


Code Block
titleLLDP
LLDP Configuration:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/46sg/configuration/guide/Wrapper-46SG/swlldp.html#wp1064516


sw1(config)#lldp run



sw1#show lldp neighbors
Capability codes:
    (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
    (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other

Device ID           Local Intf     Hold-time  Capability      Port ID
Switch              Gi0/2          120                        Gi0/2

Total entries displayed: 1

sw1#show lldp neighbors
Capability codes:
    (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
    (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other

Device ID           Local Intf     Hold-time  Capability      Port ID
Switch              Gi0/2          120                        Gi0/2
Switch              Gi0/1          120                        Gi0/1
RES-MSW-1101A       Gi0/48         120        B,R             577

Total entries displayed: 3

sw1#


vlan 1 ip address


Code Block
titlevlan ip address
VLAN Configuration:
---------------------


sw1#show vlan id 1

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Gi0/1, Gi0/2, Gi0/3, Gi0/4, Gi0/5, Gi0/6, Gi0/7, Gi0/8, Gi0/9, Gi0/10
                                                Gi0/11, Gi0/12, Gi0/13, Gi0/14, Gi0/15, Gi0/16, Gi0/17, Gi0/18, Gi0/19
                                                Gi0/20, Gi0/21, Gi0/22, Gi0/23, Gi0/24, Gi0/25, Gi0/26, Gi0/27, Gi0/28
                                                Gi0/29, Gi0/30, Gi0/31, Gi0/32, Gi0/33, Gi0/34, Gi0/35, Gi0/36, Gi0/37
                                                Gi0/38, Gi0/39, Gi0/40, Gi0/41, Gi0/42, Gi0/43, Gi0/44, Gi0/45, Gi0/46
                                                Gi0/47, Gi0/49, Gi0/50, Gi0/51, Gi0/52

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0

Remote SPAN VLAN
----------------
Disabled

Primary Secondary Type              Ports
------- --------- ----------------- ------------------------------------------

sw1#


sw1#show running-config interface vlan 1


interface Vlan1
 ip address 10.10.1.1 255.255.255.0
end


sw2#show running-config interface vlan 1
Building configuration...

Current configuration : 59 bytes
!
interface Vlan1
 ip address 10.10.1.2 255.255.255.0
end