Encapsulation (Physical Interface)
...
| Code Block | ||
|---|---|---|
| root@QFX5110-2# set interfaces ge-0/0/13 encapsulation ?
Possible completions:
ethernet-bridge Ethernet layer-2 bridging
||
ethernet-
...
bridge
...
ethernet-bridge—Use Ethernet bridge encapsulation on Ethernet interfaces that have bridging enabled and that must accept all packets.
ethernet-ccc—Use Ethernet CCC encapsulation on Ethernet interfaces that must accept packets carrying standard Tag Protocol ID (TPID) values.
vlan-ccc—Use VLAN CCC encapsulation on Ethernet interfaces with VLAN tagging enabled. VLAN CCC encapsulation supports TPID 0x8100 only. You must configure this encapsulation type on both the physical interface and the logical interface.
extended-vlan-bridge—Use extended VLAN bridge encapsulation on Ethernet interfaces that have IEEE 802.1Q VLAN tagging and bridging enabled and that must accept packets carrying TPID 0x8100 or a user-defined TPID.
flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration
...
| Code Block | ||||
|---|---|---|---|---|
| root@QFX5110-2# set interfaces ge-0/0/13.20 encapsulation ?
Possible completions:
dix Ethernet DIXv2 (RFC 894)
ppp-over-ether PPPoE encapsulation
vlan-bridge VLAN layer-2 bridging
vlan-ccc 802.1q tagging for a cross-connect
vlan-vpls VLAN virtual private LAN service
||||
vlan-bridge—Use Ethernet VLAN bridge encapsulation on Ethernet interfaces that have IEEE 802.1Q tagging, flexible-ethernet-services, and bridging enabled and that must accept packets carrying TPID 0x8100 or a user-defined TPID.
vlan-ccc—Use Ethernet virtual LAN (VLAN) encapsulation on CCC circuits. When you use this encapsulation type, you can configure the ccc family only.