Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

When a mobile device moves from cell to cell and performs cell selection/reselection and handover, it has to measure the signal strength/quality of the neighbor cells.


connectionhttps://www.juniper.net/documentation/us/en/software/session-smart-router/docs/cli_reference/#show-lte-connection

show lte connection router Lanner1

Code Block
titleshow lte connection
*admin@node1.conductor# show lte connection router Lanner1
Fri 2022-03-25 09:43:53 UTC
Retrieving LTE data...

============= ===================== =================== ============== ============= ============= ==================== ====================
 Device Name   Registration Status   Connection Status   IP Address     RX bytes OK   TX bytes OK   RX packets dropped   TX packets dropped
============= ===================== =================== ============== ============= ============= ==================== ====================
 lte-0         registered            connected           10.36.58.108             0             0                    0                    0



show lte

show lte router Lanner1

Code Block
titleshow lte
admin@node1.conductor# show lte router Lanner1
Fri 2022-03-25 09:45:58 UTC
Retrieving LTE data...

============= ============= ===================== =================== ================= ====================== ============ ==============
 Device Name   Target Name   Registration Status   Connection Status   Signal Strength   RSSI Signal Strength   SNR Signal   IP Address
                                                                                                                Strength
============= ============= ===================== =================== ================= ====================== ============ ==============
 lte-0         wwp0s21u4i8   registered            connected           good              -67 dBm                -0.2 dB      10.36.58.108



signal

show lte signal router Lanner1

Code Block
titleshow lte signal
*admin@node1.conductor# show lte signal router Lanner1
Fri 2022-03-25 09:46:16 UTC
Retrieving LTE data...

============= ===================== ================= ========= ========= ========== ======== ==============
 Device Name   Registration Status   Signal Strength   RSSI      SNR       RSRP       RSRQ     Carrier Name
============= ===================== ================= ========= ========= ========== ======== ==============
 lte-0         registered            good              -67 dBm   -0.8 dB   -100 dBm   -15 dB   vodafone UK


show sim

show lte sim router Lanner1

Code Block
titleshow lte sim
admin@node1.conductor# show lte sim router Lanner1
Fri 2022-03-25 09:49:07 UTC
Retrieving LTE data...

============= ============= ================= ====================== ==============================
 Device Name   Carrier                  IMSI                  ICCID   MSISDN
============= ============= ================= ====================== ==============================
 lte-0         vodafone UK   xxxxxxxxxxxxxxx   yyyyyyyyyyyyyyyyyyyyy   Error Retrieving Information





show device-interface router Lanner1 node node1 summary

show device-interface router Lanner1 node node1 name lte-0


Code Block
titlesummary
admin@node1.conductor# show device-interface router Lanner1 node node1 summary
Wed 2022-03-23 14:59:54 UTC
Retrieving device interface information...

========================== ============ ============== ==================== ==================== =================== ===================
 Name                       Forwarding   Admin Status   Operational Status   Provisional Status   Redundancy Status   MAC Address
========================== ============ ============== ==================== ==================== =================== ===================
 node1.Lanner1:dh00000005   true         up             up                   up                   non-redundant       fa:6e:52:4f:0d:59
 node1.Lanner1:dh00000007   true         up             up                   up                   non-redundant       26:32:af:9f:3c:de
 node1.Lanner1:ge-1         false        n/a            n/a                  n/a                  n/a                 n/a
 node1.Lanner1:ge-2         false        n/a            n/a                  n/a                  n/a                 n/a
 node1.Lanner1:ge-3         true         up             up                   up                   non-redundant       00:90:0b:8e:dc:d8
 node1.Lanner1:ge-4         true         up             up                   up                   non-redundant       00:90:0b:8e:dc:d9
 node1.Lanner1:ge-5         true         up             up                   up                   non-redundant       00:90:0b:8e:dc:da
 node1.Lanner1:ge-6         true         up             up                   up                   non-redundant       00:90:0b:8e:dc:db
 node1.Lanner1:ge-7         true         up             up                   up                   non-redundant       00:90:0b:8e:dc:dc
 node1.Lanner1:ge-8         false        n/a            n/a                  n/a                  n/a                 n/a
 node1.Lanner1:lte-0        true         up             up                   up                   non-redundant       f6:e9:81:48:08:1f





Code Block
titledevice-interfaces output
Lanner NCA-1515

   RSRP Signal Strength:-119 dBm
   RSRQ Signal Strength:-20 dB
   RSSI Signal Strength:-76 dBm
   Radio Interface:   lte
   Registration Status:registered
   SNR Signal Strength:-1.4 dB
   Signal Strength:   fair
   reinit-attempt:    28



Madrid in the loft:
  
   RSRP Signal Strength:-111 dBm
   RSRQ Signal Strength:-13 dB
   RSSI Signal Strength:-78 dBm
   Radio Interface:   lte
   Registration Status:registered
   SNR Signal Strength:11.2 dB
   Signal Strength:   fair
   reinit-attempt:    19


RSRP

Reference Signals Received Power 

>= -80 dBm Excellent

RSRQ

Reference Signal Received Quality 

>= -10 dB Excellent

RSSI

Received Signal Strength Indicator

>= -70 dBm Excellent

SNR 



https://www.speedcheck.org/wiki/rssi/

...