Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


1- L3 interface

2- BGP


Code Block
titleshow interface
collapsetrue
localhost#show interfaces status
Port       Name        Status       Vlan     Duplex Speed  Type            Flags
Et1                    connected    1        full   unconf EbraTestPhyPort
Et2                    connected    1        full   unconf EbraTestPhyPort
Ma1                    connected    routed   a-full a-1G   10/100/1000


localhost#show ip interface brief
Interface              IP Address         Status     Protocol         MTU
Loopback0              10.0.0.1/32        up         up             65535
Management1            10.0.2.15/24       up         up              1500


...


On spine01 and spine02

interface Ethernet1 no switchport ip address 10.1.2.1/30 ! interface Loopback0 ip address 10
Code Block
titleIP and BGP configuration cmds
collapsetrue

.

...

.



show ip bgp summary

show ip bgp neighbors

...

Code Block
titleshow BGP commands
collapsetrue
spine01#show ip bgp summary
BGP summary information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Neighbor Status Codes: m - Under maintenance
  Neighbor         V  AS           MsgRcvd   MsgSent  InQ OutQ  Up/Down State  PfxRcd PfxAcc
  10.1.2.2         4  65000             39        44    0    0 00:34:00 Estab  1      1



spine01#show ip bgp neighbors
BGP neighbor is 10.1.2.2, remote AS 65000, internal link
  BGP version 4, remote router ID 10.0.0.2, VRF default
  Negotiated BGP version 4
  Last read 00:00:10, last write 00:00:10
  Hold time is 180, keepalive interval is 60 seconds
  Configured hold time is 180, keepalive interval is 60 seconds
  Connect timer is inactive
  Idle-restart timer is inactive
  BGP state is Established, up for 00:35:10
. . . .


spine01#show ip bgp neighbors 10.1.2.2 routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.2/32            10.1.2.2              0       100     0      i


spine01#show ip bgp neighbors 10.1.2.2 advertised-routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast, q - Queued for advertisement
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.1/32            10.1.2.1              -       100     -      i


spine01#show ip bgp neighbors 10.1.2.2 received-routes
BGP routing table information for VRF default
Router identifier 10.0.0.1, local AS number 65000
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
                    S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

         Network                Next Hop              Metric  LocPref Weight Path
 * >     10.0.0.2/32            10.1.2.2              -       100     -      i











show ip route

localhost#show ip route VRF: default Codes: C - connected, S - static, K - kernel, O - OSPF, IA - OSPF inter area, E1 - OSPF external type 1, E2 - OSPF external type 2, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type2, B I - iBGP, B E - eBGP, R - RIP, I L1 - IS-IS level 1, I L2 - IS-IS level 2, O3 - OSPFv3, A B - BGP Aggregate, A O - OSPF Summary, NG - Nexthop Group Static Route, V - VXLAN Control Service, DH - Dhcp client installed default route Gateway of last resort: K 0.0.0.0/0 [40/0] via 10.0.2.2, Management1 B I 10.0.0.1/32 [200/0] via 10.1.2.1, Ethernet1 C 10.0.0.2/32 is directly connected, Loopback0 C 10.0.2.0/24 is directly connected, Management1 C 10.1.2.0/30 is directly connected, Ethernet1 localhost#show ip route bgp VRF: default Codes: C - connected, S - static, K - kernel, O - OSPF, IA - OSPF inter area, E1 - OSPF external type 1, E2 - OSPF external type 2, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type2, B I - iBGP, B E - eBGP, R - RIP, I L1 - IS-IS level 1, I L2 - IS-IS level 2, O3 - OSPFv3, A B - BGP Aggregate, A O - OSPF Summary, NG - Nexthop Group Static Route, V - VXLAN Control Service, DH - Dhcp client installed default route B I 10.0.0.1/32 [200/0] via 10.1.2.1, Ethernet1
Code Block
titleshow ip route
collapsetrue