...
| Access from Laptop | |||
|---|---|---|---|
| 1- start the Juni[per VPN | |||
| 2- Start workstation Pro |
| ||
| From web browser | |||
| https://10.23.8.9/ui/ | |||
| Host Info | |||
| Select the Host | CPU Cores: 24vCPU ( 2x 12 ) RAM: 160GB
| ||
| Host CPU |
| ||
| VM Info | |||
CPU: 12 CPU RAM: 128GB
| |||
| Conductor IP address | |||
| from the Laptop ( using Juniper VPN ) | 10.23.8.17 and 10.23.8.18 | ||
| Conductor and SSR in ESXi | conductor node1 on ESXi : 172.2.8.124/16 GW= 172.20.0.1 DNS= 8.8.8.8 ( https://10.23.8.124/ ) conductor node2 on ESXi : 172.2.8.124/16 GW= 172.20.0.1 DNS= 8.8.8.8 | ||
| for the SSR | 172.20.8.17 17/16 and 172.20.8.18/16 GW= 172.20.0.1 DNS= 8.8.8.8 | ||
| branch1 and dc1 | 172.20.8.19 19/16 and 172.20.8.20/16 GW= 172.20.0.1 DNS= 8.8.8.8 | ||
| |||
| SSR test 6.0 IBU | 172.20.8.112/16 GW= 172.20.0.1 DNS= 8.8.8.8 | ||
| Static IP address | network-scripts ifcfg-ens ifcfg-eth | ||
| BASIC SSR Config | basic SSR configuration | ||
| branch1 | vi /etc/sysconfig/network-scripts/ifcfg-ens3 ( driver e1000 )
systemctl restart network.service | defaul troute | service ( or reboot ) |
| default route | via=172.20.0. 1 and dev= ens3
| ||
| nameserver | /etc/resolv.conf namserver 8.8.8.8 | ||
| |||
1- create an static IP address 2- stop the 128T.service 3- create the node on the Condcutor 4- select the asset id | |||
| DC | |||
...