...
| Access from Laptop | |
|---|---|
| 1- start the Juni[per VPN | |
| 2- Start workstation Pro |
|
| From web browser | |
| https://10.23.8.9/ui/ | |
| Host Info | |
| Select the Host | CPU Cores: 24vCPU ( 2x 12 ) RAM: 160GB
|
| Host CPU |
|
| VM Info | |
CPU: 12 CPU RAM: 128GB
| |
| Conductor IP address | |
| from the Laptop ( using Juniper VPN ) | 10.23.8.17 and 10.23.8.18 |
| Conductor and SSR in ESXi | conductor node1 on ESXi : 172.2.8.124/16 GW= 172.20.0.1 DNS= 8.8.8.8 ( https://10.23.8.124/ ) conductor node2 on ESXi : 172.2.8. 16124/16 GW= 172.20.0 .1.1 DNS= 8.8.8.8 |
| for the SSR | 172.20.8.17/16 and 172.20.8.18/1616 GW= 172.20.0.1 DNS= 8.8.8.8 |
| branch1 and dc1 | 172.20.8.19/16 and 172.20.8.20/1616 GW= 172.20.0.1 DNS= 8.8.8.8 |
| |
| SSR test 6.0 IBU | 172.20.8.112/16 GW: 172 GW= 172.20.0.1 DNS= 8.8.18.8 |
| Static IP address | network-scripts ifcfg-ens ifcfg-eth |
| BASIC SSR Config | basic SSR configuration |
| branch1 | vi /etc/sysconfig/network-scripts/ifcfg-ens3 ( driver e1000 )
systemctl restart network.service ( or reboot ) |
| default route | via=172.20.0.1 and dev= ens3
|
| nameserver | /etc/resolv.conf namserver 8.8.8.8 |
| |
1- create an static IP address 2- stop the 128T.service 3- create the node on the Condcutor 4- select the asset id | |
| DC | |
...