name , subnet1 and subnet2
create an IP Pools Resource
| Lab 1 |
|---|
| 2. Ressource management | Resources > |
|---|---|
Create an IP Pool: name: jlk-pool , subnet1 and subnet2 spine-loopback: 10.20.10.0/24 leaf-loopback: 10.20.30.0/24 external-route: 10.10.0.0/22 | |
Create ASN Pool: Name and range | |
| External Systems > | |
Create External Router: Name IPv4@ ASN | |
| 3. Racks | Design > Rack Type |
| Single-Homed Rack Type | name connectivity type: L2 + Add Leafs: Name: & Leaf Logical Device: + Server: Name: & Logical Device: AOS-1x10-1 + Switch: name & map to the ToR switch |
| Dual-Homed Rack Type | |
| 4. Templates | Design > Templates |
| Name: & Rack-Based | |
| 5. Device Management | Devices > Managed Devices |
| Select the Devices >> Then Acknoloedge them | |
| 6. Blueprints | Blueprints > |
| Create a Blueprint | Name: & Select the template: jlk-xxxxx |
| Assign Ressources | Click on the template: selct the IP ools: jlk-pool, spine-loopback, leaf-loopback, |
| Assign Device Models | Select the Juniper vQFX Select the Server |
| Assign System IDs | spine1 >> 172.20.yoursubnet#.11 : 172.20.115.11 from cloudlabs.apstra.com
|
| Assign External Router Link | |
| Assign SVI Subnet | then select virtual-networks ????? |
| Configure Default VRF | Staged > Virtual > Security Zones > Select the default VRF > Click "Add Connectivity Point" |
| Deploy Blueprint | |
| 7. Multitenancy | |
| Virtual networks | |
| Create Security Zone | |
| Assign Connectivity to security Zone | |
| Enable DHCP Server for Security Zone | |
| Create VN: finance-www | |
| Create VN: finance-app | |
| Create Inter-rack vxLAB ( finance-db) | |
| Assign resources to Virtual Networks | |
| Deploy VxLANs | |
| Check Server Connectivity | |
| Check Inter-network Connecttivity | |
| 8. Configlets | |
| Edit NTP Configlet | |
| Apply NTP Cnfiglet | |
| 9. Intent-Based Analytics -Intro | |
| Instantiate Predefined IBA Probe | |
| Stopping and Stating IBA Probe | |
| 10. Root Cause Indentification | |
| Enabling Connectivity RCI Fault Model | |
| 11. troubleshooting Scenario | |
| Troubleshootinf Config Deviation | |
