|
|
|---|
|
| Code Block |
|---|
| 1- press "SPACE BAR" |
|
...
2- at the prompt disable watchdog : watchdog disable
3- Enter recovery mode by typing: recovery
4- at the CLI prompt type: configuration
5- set system root-quthen plain-text-password
...
when asked ( Need to be quick, Just after the "FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.10" paragraph )
2- at the prompt disable watchdog : loader> watchdog disable
4- loader> type "boot -s" ( in single mode )
5- Enter recovery mode by typing: /sbin/sh/ recovery
6- at the CLI prompt type: configuration
7- set system root-authen plain-text-password
>>> type the new password [ juniper1 ]
type: commit and-quit
8- type "exit" and
9- "Reboot the system? [y/n] y " |
|
| EX2300-C |
|
|---|
|
| Code Block |
|---|
| ## Executing script at 61000000
Setting bus to 0
SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
device 0 offset 0x140000, size 0x140000
SF: 1310720 bytes @ 0x140000 Read: OK
7313fffc: 5a6d1cc7 ..mZ
crc32 for 73000000 ... 7313ffff ==> c71c6d5a
Total of 1 word(s) were the same
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB, mapped at 00000088
## Starting application at 0x00000074 ...
Consoles: U-Boot console
FreeBSD/armv6 U-Boot loader, Revision 1.2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< CTRL ^ C
(fbsd-builder@svl-bsdx-05.juniper.net, Fri Aug 26 11:13:00 PDT 2016)
DRAM: 2048MB
Number of U-Boot devices: 2
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=0 slice=<auto> partition=<auto>... good.
|
Main Menu
1. Boot [J]unos volume
2. Boot Junos volume in [S]afe mode
3. [R]eboot
4. [B]oot menu
5. [M]ore options <<<<<<<<<<<<<<<<< M
Choice:
Main Menu
1. Boot [J]unos volume
2. Boot Junos volume in [S]afe mode
3. [R]eboot
4. [B]oot menu
5. [M]ore options <<<<<<<<<<<<<<<<<<< M
Choice:
Options Menu
1. Recover [J]unos volume <<<<<<<<<<<<<<<<<<< J
2. Recovery mode - [C]LI
3. Check [F]ile system
4. Enable [V]erbose boot
5. [B]oot prompt
6. [M]ain menu
|
|
| Widget Connector |
|---|
| url | https://www.youtube.com/watch?v=k3g3Cy7vUTc |
|---|
|
...