Page Comparison

Exercise 1	Static Route
add routing instance	Config > Router: seabo1 ADD Routing Instances. Type: rt:default-instance for
Add static route	ADD next to Static Routes. Destination Address: 172.16.128.2/32 Administrative Distance: 1 Next Hop Choice: Next Hop ADD Static Route Next Hop List: 10.0.128.1 Image Removed Image Added show fib Image Added Image Added
Add Access Policy to service	Service named webserver. ADD: Access Policies Name the Source: corp Select allow as Permission Image Added
	show fib Image Added
Test	On the Branch Router: ping 172.16.128.2 On The Branch Client: Open a web browser and point it to http://172.16.128.2

Static route on Branch router

we are just routing traffic

>> new session in the remote box, not the same session ID

show rib static router seabo1

>> NH is g3 ( or GIID 3, the mpls1 interface )

Code Block

title	show rib static
collapse	true

admin@conductor1.conductor# show rib stati router seabo1
Thu 2021-05-06 09:36:26 UTC
========
 seabo1
========
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
       T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       F - PBR,
       > - selected route, * - FIB route

S>* 172.16.128.2/32 [1/0] via 10.0.128.1, g3, 00:11:09


Completed in 0.14 seconds
admin@conductor1.conductor#

show network-interface router seabo1

GIID ( Blobal Interface ID) 3 = mpls1

https://docs.128technology.com/docs/config_ha/#about-the-global-id

Code Block

title	show network-interface
collapse	true

admin@conductor1.conductor# show network-interface router seabo1 
Thu 2021-05-06 09:40:57 UTC

======== ======= ======== ======= ============ ====== ========== ======= ======= ======= ======= ======= ======= ======= ======
 Router   Node    Device   Name    Forwarding   VLAN   Device     Type    DHCP    Addre   Gatew   Hostn   Admin   Oper    GIID
                                                       Type                       ss      ay      ame     Statu   Statu
                                                                                                          s       s
======== ======= ======== ======= ============ ====== ========== ======= ======= ======= ======= ======= ======= ======= ======
 seabo1   node1   mpls     mpls1   true            0   ethernet   exter   disab   10.0.   10.0.   --      up      up         3
                                                                  nal     led     128.0   128.1
                                                                                  /31
 seabo1   node1   svr1     srv1    true            0   ethernet   exter   disab   192.1   --      --      up      up         4
                                                                  nal     led     68.64
                                                                                  .1/24

Completed in 0.16 seconds

Exercise 2	Configure Service Routes and Use SVR
Configure Service Route	Router > seabo1 ADD: Service Routes: Image Added
modify service	webserver service. Select internal for Security Policy.
Remove Static Route	Routers: seabo1 Routing Instances: rt:default-instance remove the Static Routes

View FIB

Set Service to Private

Verify Connectivity
	On the Branch Router: ping 172.16.128.2 On The Branch Client: Open a web browser and point it to http://172.16.128.2

Versions Compared

Old Version 2

New Version Current

Key