Versions Compared

Old Version 2

changes.mady.by.user Jean-luc KRIKER

Saved on

compared with

New Version Current

changes.mady.by.user Jean-luc KRIKER

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

https://www.ipinfusion.com/blogs/deploying-virtual-private-lan-service-vpls-on-ocnos/


Interfaces


Code Block
titleinterfaces
collapse
vplsR1#show running-config ! ! Software version: DEMO_VM-OcNOS-SP-MPLS-x86-6.4.1.32-GA 11/04/2023 18:55:29 ! !Last configuration change at 18:56:29 UTC Sat Dec 23 2023 by ocnos ! ! feature netconf-ssh feature netconf-tls ! no service password-encryption ! snmp-server enable traps link linkDown snmp-server enable traps link linkUp ! ip vrf management ! qos enable ! mpls vpls DEMO-VPLS 10 signaling ldp vpls-peer 10.10.100.3 vpls-peer 10.10.100.4 exit-signaling exit-vpls ! hostname R1 ip domain-lookup errdisable cause stp-bpdu-guard no feature telnet feature ssh feature ntp ntp enable feature rsyslog
true
interface lo
 ip address 127.0.0.1/8
 ip address 10.10.100.1/32 secondary
 ipv6 address ::1/128
!
interface eth0
 ip address 192.168.0.201/24
!
interface eth1
 ip address 192.168.12.1/30
 mtu 9216
 label-switching
 mpls ldp-igp sync ospf
 ip ospf network point-to-point
 enable-ldp ipv4
!
interface eth2
 ip address 192.168.13.1/30
 mtu 9216
 label-switching
 mpls ldp-igp sync ospf
 ip ospf network point-to-point
 enable-ldp ipv4
!
interface eth5
!
interface eth5.1 switchport
!

#

OSPF config


Code Block
titleOSPF
collapsetrue
router ospf 1
 ospf router-id 10.10.100.1
 passive-interface lo enable
 network 10.10.100.8/32 area 0.0.0.0
 network 192.168.12.0/30 area 0.0.0.0
 network 192.168.13.0/30 area 0.0.0.0



interface lo
 ip address 10.10.100.20/32 secondary
!
interface eth1
 ip ospf network point-to-point
!
interface eth2
 ip ospf network point-to-point
!


MPLS & LDP ConfigLDP config and LDP-FRR configuration


Code Block
titleLDP
collapsetrue
!
router ldp
 router-id 10.10.100.1
 inter-area-lsp eth1
 session-protection
 targeted-peer ipv4 10.10.100.3
  exit-targeted-peer-mode
 targeted-peer ipv4 10.10.100.4
  exit-targeted-peer-mode
 transport-address ipv4 10.10.100.1
!
interface
lo
eth1
ip
mtu
address 127.0.0.1/8 ip address 10.10.100.1/32 secondary ipv6 address ::1/128
9216
 label-switching
 mpls ldp-igp sync ospf
 enable-ldp ipv4
!
interface
eth0 ip address 192.168.0.201/24 ! interface eth1 ip address 192.168.12.1/30 
eth2
 mtu 9216
 label-switching
 mpls ldp-igp sync
ospf ip
 ospf
network
point-to-point 
enable-ldp ipv4
!
interface eth2 ip address 192.168.13.1/30 mtu 9216 label-switching mpls ldp-igp sync ospf ip ospf network point-to-point enable-ldp ipv4 ! interface eth3 ! interface eth4 ! interface eth5 ! interface eth5.1 switchport ! exit ! router ospf 1 ospf router-id 10.10.100.1 passive-interface lo enable network 10.10.100.1/32 area 0.0.0.0 network 192.168.12.0/30 area 0.0.0.0 network 192.168.13.0/30 area 0.0.0.0 ! ! end

Other config
PE config

 Code Block
titleother global config
collapsetrue
R1#show running-config
!
! Software version: DEMO_VM-OcNOS-SP-MPLS-x86-6.4.1.32-GA 11/04/2023 18:55:29
!
!Last configuration change at 18:56:29 UTC Sat Dec 23 2023 by ocnos
!
!
feature netconf-ssh
feature netconf-tls
!
no service password-encryption
!
snmp-server enable traps link linkDown
snmp-server enable traps link linkUp
!
ip vrf management
!
qos enable
!


end



VPLS Config


 Code Block
titleVPLS
mpls vpls DEMO-VPLS 10
 signaling ldp
  vpls-peer <peer-loopbak-IP@>
  vpls-peer <peer-loopbak-IP@>
  exit-signaling
 exit-vpls
!
!
service-template vc1
   match all
!
interface xe1
  switchport
  mpls-vpls vpls1 service-template vpls1
!