Documentation: https://github.com/ksator/junos-automation-with-saltstack/wiki/09.-Junos-proxy-end-to-end-examples
| Code Block |
|---|
| title | check python installation |
|---|
|
sudo apt-get install python3-pip
sudo pip3 install junos-eznc
sudo python3 -m easy_install --upgrade pyOpenSSL
sudo pip3 install jxmlease
|
|
|
|---|
| configuration file | sudo vi /etc/salt/proxy master: 172.30.95.91 |
List of all proxy: /srv/pillar/top.sls |
| Code Block |
|---|
| root@saltsackmaster:/srv/pillar# more *.sls
::::::::::::::
top.sls
::::::::::::::
base:
'srx300-1-rl102':
- srx300-1-rl102
'qfx5100-1-rl102':
- qfx5100-1-rl102
::::::::::::::
qfx5100-1-rl102.sls
::::::::::::::
proxy:
proxytype: junos
host: 172.30.95.177
username: Netbox
password: Netbox
port: 830
name: QFX5100-1-RL102
::::::::::::::
srx300-1-rl102.sls
::::::::::::::
proxy:
proxytype: junos
host: 172.30.95.174
username: Netbox
password: Netbox
port: 830
name: SRX300-1-RL102
|
| Code Block |
|---|
| labuser@saltsackmaster:~$ more /srv/pillar/top.sls
base:
'fw1_proxy':
- mx
|
|
list of all Devices /srv/pillar/mx.sls |
| Code Block |
|---|
| labuser@saltsackmaster:~$ more /srv/pillar/mx.sls
proxy:
proxytype: junos
host: 172.30.95.174
username: Netbox
password: Netbox
port: 830
name: SRX300-1-RL102
|
|
| start the salt proxy | in debug mode to check that everything is ok: sudo salt-proxy --proxyid=fw1_proxy -l debug then in deamon mode
|
| Accept the salt-key | sudo salt-key -L sudo salt-key -a fw1_proxy |
| test | sudo salt 'fw1_proxy' test.ping |
| get facts | sudo salt 'fw1_proxy' junos.facts |
| grains | sudo salt 'fw1_proxy' grains. |
|
|
|
|