Page Comparison

https://www.juniper.net/documentation/us/en/software/session-smart-router/docs/config_bgp/#bgp-over-svr-bgposvr

https://www.juniper.net/documentation/us/en/software/session-smart-router/docs/config_reference_guide#routing-protocol-bgp

1- Create a Network interface ( loopback loopback0 under routing instance )

2- Change the BGP router-id ( = loopback IP@ )

3- Add BGP neighbors ( = loopback address , AS# , use local-interface = loopback , + address-family= ipv4-unicast,  +   Router As Next Hop: True   and TTL=5 )

2- BGPoSVR: NH is the local loopback ( routing interface )

...