Lab 1 | |
---|---|
2. Ressource management | Resources > |
Create an IP Pool: name: jlk-pool , subnet1 and subnet2 spine-loopback: 10.20.10.0/24 leaf-loopback: 10.20.30.0/24 external-route: 10.10.0.0/22 | |
Create ASN Pool: Name and range | |
External Systems > | |
Create External Router: Name IPv4@ ASN | |
3. Racks | Design > Rack Type |
Single-Homed Rack Type | name connectivity type: L2 + Add Leafs: Name: & Leaf Logical Device: + Server: Name: & Logical Device: AOS-1x10-1 + Switch: name & map to the ToR switch |
Dual-Homed Rack Type | |
4. Templates | Design > Templates |
Name: & Rack-Based | |
5. Device Management | Devices > Managed Devices |
Select the Devices >> Then Acknoloedge them | |
6. Blueprints | Blueprints > |
Create a Blueprint | Name: & Select the template: jlk-xxxxx |
Assign Ressources | Click on the template: selct the IP ools: jlk-pool, spine-loopback, leaf-loopback, |
Assign Device Models | Select the Juniper vQFX Select the Server |
Assign System IDs | spine1 >> 172.20.yoursubnet#.11 : 172.20.115.11 from cloudlabs.apstra.com |
Assign External Router Link | |
Assign SVI Subnet | then select virtual-networks ????? |
Configure Default VRF | Staged > Virtual > Security Zones > Select the default VRF > Click "Add Connectivity Point" |
Deploy Blueprint | |
7. Multitenancy | |
Virtual networks | |
Create Security Zone | |
Assign Connectivity to security Zone | |
Enable DHCP Server for Security Zone | |
Create VN: finance-www | |
Create VN: finance-app | |
Create Inter-rack vxLAB ( finance-db) | |
Assign resources to Virtual Networks | |
Deploy VxLANs | |
Check Server Connectivity | |
Check Inter-network Connecttivity | |
8. Configlets | |
Edit NTP Configlet | |
Apply NTP Cnfiglet | |
9. Intent-Based Analytics -Intro | |
Instantiate Predefined IBA Probe | |
Stopping and Stating IBA Probe | |
10. Root Cause Indentification | |
Enabling Connectivity RCI Fault Model | |
11. troubleshooting Scenario | |
Troubleshootinf Config Deviation | |
Page Comparison
General
Content
Integrations