Versions Compared

Old Version 6

changes.mady.by.user Jean-luc KRIKER

Saved on

compared with

New Version Current

changes.mady.by.user Jean-luc KRIKER

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/family-edit-interfaces.html



Family bridge is used when you want a port that has more than one logical unit, each with the same or different encapsulations. Bridge domains are associated with GRE interface with the corresponding BD VLAN.

ethernet-switching   only one logical unit



root@EX9208-1-RE1# set interfaces ge-1/0/1.100 family ? Possible completions: > ethernet-switching Ethernet switching parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > vpls Virtual private LAN service parameters [edit]
Code Block
titleEX9200


 Code Block
titleQFX5110
root@QFX5110-2# set interfaces ge-0/0/0.100 family ?
Possible completions:
> ccc                  Circuit cross-connect parameters
> ethernet-switching   Ethernet switching parameters
> inet                 IPv4 parameters
> inet6                IPv6 protocol parameters
> iso                  OSI ISO protocol parameters
> mpls                 MPLS protocol parameters
> vpls                 Virtual private LAN service parameters
{master:0}[edit]




root@SRX300-1-RL102# set interfaces ge-0/0/2.0  ?
Possible completions:
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
> ccc                  Circuit cross-connect parameters
> ethernet-switching   Ethernet switching parameters
> inet                 IPv4 parameters
> inet6                IPv6 protocol parameters
> iso                  OSI ISO protocol parameters
> mpls                 MPLS protocol parameters
> tcc                  Translational cross-connect parameters
> vpls                 Virtual private LAN service parameters
[edit]
root@SRX300-1-RL102#
 Code Block
titleSRX family
 family



jcluser@vMX-0# set interfaces ge-0/0/3.0 family ?
Possible completions:
> bridge               Layer-2 bridging parameters
> ccc                  Circuit cross-connect parameters
> inet                 IPv4 parameters
> inet6                IPv6 protocol parameters
> iso                  OSI ISO protocol parameters
> mpls                 MPLS protocol parameters
> pppoe                PPP over Ethernet underlying interface-specific options
> tcc                  Translational cross-connect parameters
> vpls                 Virtual private LAN service parameters
[edit]
 Code Block
titlevMX