Page Comparison

Image RemovedImage Added

https://www.juniper.net/documentation/us/en/software/vsrx/vsrx-consolidated-deployment-guide/vsrx-vmware/topics/concept/security-vsrx-vmware-overview.html

1- create the design

2- create the network

3- enable ssh on kali  ( root/toor)

4-

...

vSRX1 ( root / Juniper1

...

! )

• create 3 networks on vmware ( Mgt, Untrusted and Trusted)
• Map the vmware network with the correct ge-0/0 interface ( check VMware Mac@ + vSRX ge I/F Mac@ )

...

5- set arp-proxy on the interface ( if using different subnet and not NAT )

1- create the design

https://draw.io

2- create the network

do a

ping 192.168.70.2

ping 1.2.3.20

ping 10.10.10.23

3- enable ssh on kali  ( root/toor)

http://www.drchaos.com/enable-ssh-on-kali-linux-enable-ssh-on-kali-linux/

5- set arp-proxy on the interface ( if using different subnet and not NAT )

root@vSRX1#

set interfaces ge-0/0/0.0 proxy-arp

set interfaces ge-0/0/1.0 proxy-arp