Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

https://www.mist.com/documentation/template-based-configuration-with-device-and-port-profile/

  • Organization-Level Switch Settings
  • Network-Level Settings
  • Individual Switch Administration


Switch templateOrganization > Switch Templates

All Switches Configuration
     Radius server
     NTP server
     CLI Configuration

Shared Elements
     Network
     Port Profile
     Dynamic Port Configuration

Select Switches Configuration
     Add Rule

All Switches Configuration
Networks

default vlan 1

Add Network: Name and Vlan ID

Port Profiles

Defaulkt:

Add Port profile:
       Name & Port Enabled
       Port Mode , Port Network, VoIP Network
       use dot1x authen, Speed, Duplex, Mac linit, PoE and STP Edge   
       

 Dynamic Port Configuration

Add Rule: 

Check: LLDP system Name, LLDP Chassis ID or Radius Username
Select: Select the Xst segment
Offset
Text starts
Apply (Port) configuration Profile:  from the list above
    




Shared Elements






Select Switches Configuration
Info Tab:

Name

filter: switch name, switch role and switch type.

Port Config Tab:

port range

config profile : for AP, iot, uplink, . . . 

CLI Config Tab:




  • No labels