Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »








The basic premise is to restrict inbound access to
the public-facing addresses to only allow ports 4505/TCP, 4506/TCP, and 930/TCP


Install 128T Router

1. Launch a Linux command prompt.
2. Enter the command sudo yum install
http://yum.128technology.com/installer/repo.rpm to install the
Yum repository that corresponds to the 128T software installer.
3. Enter the command sudo yum install 128T-installer command to
download the installer
4. Enter the command sudo install128t to launch the interactive installer
wizard. Result: The 128T installer application's splash screen appears.
5. Press the enter key to select Begin and start the installation wizard.
6. When prompted, open the client certificate you received as part of your 128T
purchase. Copy the entire contents, including the Certificate and Private key
information, and paste it into the Client Certificate window of the install wizard.
The content must begin with the line ----- BEGIN CERTIFICATE----- and end with ----
-END RSA PRIVATE KEY-----.
7. Press the tab key after pasting the client certificate to select the OK button, and
hit enter.


copy the client's certificate to       /etc/pki/128technology/release.pem

InitialiserSelect ROuter or Conductor




Install 128T Conductor




  • No labels