| |
999999 admin@node1.conductor# show service-path router branch1 node node1 service-name to-server1-icmp detail
Wed 2022-04-13 15:00:35 UTC
==========================
Service: to-server1-icmp
==========================
Service-Route: to-server1-icmp__dc1
Type: peer
Destination: 192.168.92.21/32
Next-Hop: 192.168.92.21, wan1-MPLS-NetwIF(Up)
Peer: dc1
Path-Metrics:
latency [64ms] loss [0] jitter [0ms]
Vector: N/A <<<<<<<<<<<<<<<<<<<<<<<< Why no vector
Cost: 999999 <<<<<<<<<<<< not use unless the other link fail
Rate: 0
Capacity: 1/unlimited
Index: 5
Meets-SLA: Yes
Prev-Meets-SLA: Yes
Reachability-Probes: N/A
Service-Route: to-server1-icmp__dc1
Type: peer
Destination: 192.168.0.116/32
Next-Hop: 192.168.0.116, wan0-mgmt(Up)(Does not meet the vector priority criteria)
Peer: dc1
Path-Metrics:
latency [47ms] loss [0] jitter [0ms]
Vector: wan0-mgmt-vector
Cost: N/A
Rate: 0
Capacity: 1/unlimited
Index: 25
Meets-SLA: Yes
Prev-Meets-SLA: Yes
Reachability-Probes: N/A
Completed in 0.05 seconds
admin@node1.conductor#
| |
| Solution | |
In the Service-policy ( attached to this service ) the vector was the wrong one 1- MPLS vector for EVE-NG 2- MPL Svector for Lanners direct connection | |
