more /var/log/128T-bootstrap/128T-bootstrap.log ERROR - cannot write defaults from encrypted quickstart file issue [root@sn9103210032 ~]# more /var/log/128T-bootstrap/128T-bootstrap.log 2022-06-23 13:03:38,153 - root - INFO - Begin 128T bootstrapping 2022-06-23 13:03:38,159 - root - INFO - Found an identifier of: 9103210032 2022-06-23 13:03:38,160 - root - INFO - Found a hostname of: SN9103210032 2022-06-23 13:03:38,226 - root - INFO - Attempting to use usb device: /dev/sdb1 2022-06-23 13:03:38,405 - root - INFO - Mounted to: /media/bootstrap-usb 2022-06-23 13:03:38,405 - lib128.task - INFO - Executing task: Pre-Scriptlet 2022-06-23 13:03:38,406 - lib128.task - INFO - Executing task: Hostname 2022-06-23 13:03:38,423 - lib128.task - INFO - Executing task: Clock Sync 2022-06-23 13:10:56,501 - lib128.task - INFO - Executing task: Factory defaults 2022-06-23 13:10:56,503 - root - ERROR - cannot write defaults from encrypted qu ickstart file 2022-06-23 13:10:56,503 - root - INFO - Attempting quickstart url: http://192.16 8.128.128/quickstart | |
| Solution | Use a none-encrypted file |
| No IP address | |
|---|---|
connect to the console port and unplug the calble and plug it back | |
| |
| ip a | 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 ip a [root@sn9103210032 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wwp0s21u1i8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 2a:99:55:8b:1f:a7 brd ff:ff:ff:ff:ff:ff
11: enp4s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:e0:ed:db:5a:11 brd ff:ff:ff:ff:ff:ff
12: enp4s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:e0:ed:db:5a:12 brd ff:ff:ff:ff:ff:ff
13: enp3s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:e0:ed:db:5a:0f brd ff:ff:ff:ff:ff:ff
14: enp3s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:e0:ed:db:5a:10 brd ff:ff:ff:ff:ff:ff
15: enp2s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:e0:ed:db:5a:0d brd ff:ff:ff:ff:ff:ff
inet6 fe80::2e0:edff:fedb:5a0d/64 scope link
valid_lft forever preferred_lft forever
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:e0:ed:db:5a:0e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.115/24 brd 192.168.0.255 scope global noprefixroute dynamic enp2s0f0
valid_lft 86190sec preferred_lft 86190sec
inet6 fe80::5b39:73b6:1455:dfd0/64 scope link noprefixroute
valid_lft forever preferred_lft forever
[root@sn9103210032 ~]#
|
ifcfg-enp2s0f0 ifcfg-enp2s0f1 | more /etc/sysconfig/network-scripts/ifcfg-enp2s0f0 ( port label 2 on Madrid ) <<<<<<<<< This one more /etc/sysconfig/network-scripts/ifcfg-enp2s0f1 ( port label 1 on Madrid ) ip a [root@sn9103210032 ~]# more /etc/sysconfig/network-scripts/ifcfg-enp2s0f1 TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=enp2s0f1 UUID=3cc12cbe-6a40-44bd-8b98-f7ad34b7bbf0 DEVICE=enp2s0f1 BOOTPROTO=none ONBOOT=no NM_CONTROLLED=no USERCTL=no |
