Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

https://docs.128technology.com/docs/config_dscp_steering

1- DSCP at the service level: define the DSCP range

2- Network interface level: DSCP range


To make use of DSCP-Map

1- change Prioritization mode to DSCP under the Network Interface Settings and

2- assign an appropriate DSCP MAP covering all the DSCP value from 0 to 63 under different priorities.


Global commands

  • No labels