Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »


https://iperf.fr/

Install iperf3

Node
lsb_release -a

on Debian:
apt-get install  iperf3

Speed test:



iperf
# iperf3 –u -p <listening port> –c <server IP@> -b <X>m -d
# iperf3 –u –p <listening port> –s 

-u : UDP packet , best for bandwitdh test
-c it's the Client side
-s it's the Server side
-p destination port number on the client side
( or listening port number on the server side)
-b for bandwidth ( default 1m)  
-d for dualtest ( bi-directional)  >> becarefull at the ID number in the report

Speed test:

Run an iperf UDP stream with at specific rate (in Mbps):

Start an iperf UDP server:       # iperf3 –u –p <listening port> –s           # iperf3 –u –p 80 –s

Then on the client:                   # iperf3 –u –p <listening port> –s           # iperf3 –u -p 80 –c 10.1.0.3  –b 200m




Single test: Client to Server


1- note the different port for the signaling and the data traffic?????

sig src: 48529


Client >>> VPLS >>> VPRN >> VPLS >> Server  ( no Rate limiting)


















  • No labels