| snmp on the swtich | snmp conf term snmp-server enable traps snmp-server community public ro snmp-server community private rw end copy running-config startup-config |
intrface Switch#show ip interface brief | include up GigabitEthernet0/1 unassigned YES unset up up GigabitEthernet0/2 unassigned YES unset up up GigabitEthernet0/48 100.123.231.2 YES manual up up | |
| LLDP | LLDP
LLDP Configuration:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/46sg/configuration/guide/Wrapper-46SG/swlldp.html#wp1064516
sw1(config)#lldp run
sw1#show lldp neighbors
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID Local Intf Hold-time Capability Port ID
Switch Gi0/2 120 Gi0/2
Total entries displayed: 1
sw1#show lldp neighbors
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID Local Intf Hold-time Capability Port ID
Switch Gi0/2 120 Gi0/2
Switch Gi0/1 120 Gi0/1
RES-MSW-1101A Gi0/48 120 B,R 577
Total entries displayed: 3
sw1#
|
| vlan 1 ip address | vlan ip address VLAN Configuration:
---------------------
sw1#show vlan id 1
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4, Gi0/5, Gi0/6, Gi0/7, Gi0/8, Gi0/9, Gi0/10
Gi0/11, Gi0/12, Gi0/13, Gi0/14, Gi0/15, Gi0/16, Gi0/17, Gi0/18, Gi0/19
Gi0/20, Gi0/21, Gi0/22, Gi0/23, Gi0/24, Gi0/25, Gi0/26, Gi0/27, Gi0/28
Gi0/29, Gi0/30, Gi0/31, Gi0/32, Gi0/33, Gi0/34, Gi0/35, Gi0/36, Gi0/37
Gi0/38, Gi0/39, Gi0/40, Gi0/41, Gi0/42, Gi0/43, Gi0/44, Gi0/45, Gi0/46
Gi0/47, Gi0/49, Gi0/50, Gi0/51, Gi0/52
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
Remote SPAN VLAN
----------------
Disabled
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
sw1#
sw1#show running-config interface vlan 1
interface Vlan1
ip address 10.10.1.1 255.255.255.0
end
sw2#show running-config interface vlan 1
Building configuration...
Current configuration : 59 bytes
!
interface Vlan1
ip address 10.10.1.2 255.255.255.0
end
|
General
Content
Integrations