Family bridge is used when you want a port that has more than one logical unit, each with the same or different encapsulations. Bridge domains are associated with GRE interface with the corresponding BD VLAN.
ethernet-switching only one logical unit
EX9200 root@EX9208-1-RE1# set interfaces ge-1/0/1.100 family ? Possible completions: > ethernet-switching Ethernet switching parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > vpls Virtual private LAN service parameters [edit] |
|---|
QFX5110 root@QFX5110-2# set interfaces ge-0/0/0.100 family ?
Possible completions:
> ccc Circuit cross-connect parameters
> ethernet-switching Ethernet switching parameters
> inet IPv4 parameters
> inet6 IPv6 protocol parameters
> iso OSI ISO protocol parameters
> mpls MPLS protocol parameters
> vpls Virtual private LAN service parameters
{master:0}[edit]
|
SRX family root@SRX300-1-RL102# set interfaces ge-0/0/2.0 family ? Possible completions: + apply-groups Groups from which to inherit configuration data + apply-groups-except Don't inherit configuration data from these groups > ccc Circuit cross-connect parameters > ethernet-switching Ethernet switching parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > tcc Translational cross-connect parameters > vpls Virtual private LAN service parameters [edit] root@SRX300-1-RL102# |
vMX jcluser@vMX-0# set interfaces ge-0/0/3.0 family ? Possible completions: > bridge Layer-2 bridging parameters > ccc Circuit cross-connect parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > pppoe PPP over Ethernet underlying interface-specific options > tcc Translational cross-connect parameters > vpls Virtual private LAN service parameters [edit] |