Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »


BPDU protectionLink

command

set protocol rstp interface ge-0/0/0 edge

set protocol rstp bpdu-block-on-edge   # OUTGOING :  don't send RSTP's BPDU on access port / Edge port


set protocol layer2-control bpdu-block interface ge-0/0/0   # INCOMING block STP / BPDU packets on access port/ Edge port




show commands

show spanning-tree interface ge-0/0/0 

>>> look for

port State: FWD or BLCK

Physical link state: Up or Down

BPDU Erro: None or Detected

Loop Protection


Root Protection
to avoid unwanted STP topology changes and
root bridge placement

  • No labels