Troubleshoot boostrap

Owned by Jean-luc KRIKER
Last updated: Jun 23, 2022
4 min read





more /var/log/128T-bootstrap/128T-bootstrap.log


ERROR - cannot write defaults from encrypted quickstart file


issue
[root@sn9103210032 ~]# more /var/log/128T-bootstrap/128T-bootstrap.log
2022-06-23 13:03:38,153 - root - INFO - Begin 128T bootstrapping
2022-06-23 13:03:38,159 - root - INFO - Found an identifier of: 9103210032
2022-06-23 13:03:38,160 - root - INFO - Found a hostname of: SN9103210032
2022-06-23 13:03:38,226 - root - INFO - Attempting to use usb device: /dev/sdb1
2022-06-23 13:03:38,405 - root - INFO - Mounted to: /media/bootstrap-usb
2022-06-23 13:03:38,405 - lib128.task - INFO - Executing task: Pre-Scriptlet
2022-06-23 13:03:38,406 - lib128.task - INFO - Executing task: Hostname
2022-06-23 13:03:38,423 - lib128.task - INFO - Executing task: Clock Sync
2022-06-23 13:10:56,501 - lib128.task - INFO - Executing task: Factory defaults
2022-06-23 13:10:56,503 - root - ERROR - cannot write defaults from encrypted qu
ickstart file
2022-06-23 13:10:56,503 - root - INFO - Attempting quickstart url: http://192.16
8.128.128/quickstart
SolutionUse a none-encrypted file

remove the password

run again bootstrap

bootstrap run


bootstrap
[root@sn9103210032 ~]# bootstrap128t run
Begin 128T bootstrapping
Found an identifier of: 9103210032
Found a hostname of: SN9103210032
Attempting to use usb device: /dev/sdb1
Mounted to: /media/bootstrap-usb
Executing task: Pre-Scriptlet
Executing task: Hostname
Executing task: Clock Sync
23 Jun 13:54:42 ntpdate[7573]: the NTP socket is in use, exiting
Command '['ntpdate', 'pool.ntp.org']' returned non-zero exit status 1.
Traceback (most recent call last):
  File "/tmp/tmpxepjsf4p/com_128technology_i95/packaging/apps/bootstrap/bootstrap/bootstrap/linux.py", line 31, in _raised_check_call
    subprocess.check_call(command)
  File "/usr/lib64/python3.6/subprocess.py", line 311, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['ntpdate', 'pool.ntp.org']' returned non-zero exit status 1.
error: Task error: Command '['ntpdate', 'pool.ntp.org']' returned non-zero exit status 1.
Executing task: Factory defaults
Received quickstart data from file: /media/bootstrap-usb/bootstrap.quickstart
Executing task: Ifcfg files
Modifying ifcfg file: ifcfg-enp2s0f1
Modifying ifcfg file: ifcfg-quickstart
Modifying ifcfg file: ifcfg-enp4s0f0
Modifying ifcfg file: ifcfg-enp2s0f0
Modifying ifcfg file: ifcfg-enp3s0f0
Modifying ifcfg file: ifcfg-kni254
Modifying ifcfg file: ifcfg-enp3s0f1
Modifying ifcfg file: ifcfg-enp4s0f1
Executing task: Initialize 128T
updating: /etc/128technology/bootstrap.quickstart
executing quickstarter
Executing task: Minion ID
Executing task: Enable 128T
Executing task: Enable salt-minion
Executing task: Post-Scriptlet
Executing task: Sync OS
Writing bootstrap results to: /var/log/128T-bootstrap
minion id contents
2713b9cd-5d80-49ee-a5fa-d06f717f5eed
Exiting with 
[root@sn9103210032 ~]# 

cat /root/128T-bootstrap.txt
cat: /root/128T-bootstrap.txt: No such file or directory





minion
[root@sn9103210032 ~]# more /etc/salt/minion
auth_safemode: true
autoload_dynamic_modules: false
enable_legacy_startup_events: false
include: /usr/lib/128technology/python/salt/file_roots/_beacons/*.conf
master:
- 192.168.0.209
master_alive_interval: 30
master_tries: -1
ping_interval: 0
random_reauth_delay: 120
recon_default: 5000
recon_max: 30000
recon_randomize: true
tcp_authentication_retries: -1
tcp_keepalive_cnt: 3
tcp_keepalive_idle: 5
tcp_keepalive_intvl: 10
transport: tcp
[root@sn9103210032 ~]#


[root@sn9103210032 ~]# more /etc/salt/minion_id
2713b9cd-5d80-49ee-a5fa-d06f717f5eed
No IP address

connect to the console port and 

unplug the calble and plug it back


ip a

16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
           link/ether 00:e0:ed:db:5a:0e brd ff:ff:ff:ff:ff:ff
           inet 192.168.0.115/24 brd 192.168.0.255 scope global noprefixroute dynamic enp2s0f0
                 valid_lft 86190sec preferred_lft 86190sec
          inet6 fe80::5b39:73b6:1455:dfd0/64 scope link noprefixroute
                  valid_lft forever preferred_lft forever

ip a
[root@sn9103210032 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: wwp0s21u1i8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 2a:99:55:8b:1f:a7 brd ff:ff:ff:ff:ff:ff
11: enp4s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:11 brd ff:ff:ff:ff:ff:ff
12: enp4s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:12 brd ff:ff:ff:ff:ff:ff
13: enp3s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:0f brd ff:ff:ff:ff:ff:ff
14: enp3s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:10 brd ff:ff:ff:ff:ff:ff
15: enp2s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:e0:ed:db:5a:0d brd ff:ff:ff:ff:ff:ff
    inet6 fe80::2e0:edff:fedb:5a0d/64 scope link
       valid_lft forever preferred_lft forever
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:e0:ed:db:5a:0e brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.115/24 brd 192.168.0.255 scope global noprefixroute dynamic enp2s0f0
       valid_lft 86190sec preferred_lft 86190sec
    inet6 fe80::5b39:73b6:1455:dfd0/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
[root@sn9103210032 ~]#

ifcfg-enp2s0f0

ifcfg-enp2s0f1

more /etc/sysconfig/network-scripts/ifcfg-enp2s0f0 ( port label 2  on Madrid )   <<<<<<<<< This one

more /etc/sysconfig/network-scripts/ifcfg-enp2s0f1   ( port label 1  on Madrid ) 

ip a
[root@sn9103210032 ~]# more /etc/sysconfig/network-scripts/ifcfg-enp2s0f1
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=enp2s0f1
UUID=3cc12cbe-6a40-44bd-8b98-f7ad34b7bbf0
DEVICE=enp2s0f1
BOOTPROTO=none
ONBOOT=no
NM_CONTROLLED=no
USERCTL=no