|
|
|---|
| PoC requirement | https://www.juniper.net/documentation/en_US/healthbot/topics/reference/general/healthbot-prerequisites.html
labuser@HealthBot3:~$ sudo healthbot setup
Setting new password for postgres db
Do you want to install on kubernetes? [y/N] y
Checking disk space
Minimum 60 GB of disk space is required in /var partition. Available: 25 GB
labuser@HealthBot3:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 7.9G 0 7.9G 0% /dev
tmpfs 1.6G 8.8M 1.6G 1% /run
/dev/sda1 49G 21G 26G 45% /
Check sse4_2
lscpu | grep sse4_2
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon nopl xtopology tsc_reliable nonstop_tsc cpuid pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single pti retpoline rsb_ctxsw fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xsaves arat pku ospke
Check think link ESXi CPU chipset |
| SW requirement | Ubuntu version 16.04.01 (Xenial Xerus)
kernel version must be 4.4.19 or greater.
We recommend installing Ubuntu as one large disk partition.
labuser@HealthBot3:~$ sudo healthbot setup
[sudo] password for labuser:
Do you want to install on kubernetes? [y/N] y
Checking disk space
Validating kernel version
Linux kernel 4.4.0-142-generic is not supported. Please upgrade to 4.4.19 or greater version.
For server:
sudo apt-get install --install-recommends linux-generic-hwe-16.04 -y
|
| All nodes must run NTP or other time-synchronization at all times. Docker version 18.09.3 or later is required >>> Docker Installation on ubuntu sudo vi /etc/sysctl.conf
net.bridge-nf-call-iptables=1 pip install --upgrade pip . . . |
|
|
| sudo apt-get install -y /var/tmp/healthbot-3.0.0.deb |
| Download the healthbot | sudo wget "https://cdn.juniper.net/software/contrail-healthbot/3.0.0/healthbot-3.0.0-1.deb?SM_USER=xxxxxx&__gda__=xxxxxxx" /var/tmp/healthbot-3.0.0.deb |
| install the healthbot | sudo apt-get install -y /var/tmp/healthbot-3.0.0.deb |
| healthbot status |
| docker ps |
| https://172.30.95.90:8080/ |
https://www.juniper.net/documentation/en_US/healthbot/topics/topic-map/healthbot-install-interactive.html
1- sudo apt-get update -y
2- get the .deb package ( https://support.juniper.net/support/downloads/ )
3- get health bot to /var/tmp
cd /var/tmp
wget "https://cdn.juniper.net/software/contrail-healthbot/1.0.1/healthbot-1.0.1.deb?SM_USER=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" -O healthbot-1.0.1.deb
4-
| HealthBot 1.0 |
|---|
|
|
| Install Unbuntu |
Ubuntu Install: amd64 !!!!!!!!!!!!
RAM: 20GB
vCPU: 6
HHD: 100GB
Mgt IP@: 172.30.92.217/25
GW: 172.30.92.129
name server: 8.8.8.8
domain name: ?????
ubuntu user : seuki / juniper123!
>>> sudo apt-get update <<<<<< only !!!!!!
set system memory hugepages page-size 1024 page-count 7
set virtual-network-functions ubuntu160401 image /var/third-party/images/ubuntu160401.qcow2
set virtual-network-functions ubuntu160401 storage vdb type cdrom source file /var/third-party/ISO/ubuntu160401.iso
set virtual-network-functions ubuntu160401 virtual-cpu 0 physical-cpu 4
set virtual-network-functions ubuntu160401 virtual-cpu 1 physical-cpu 11
set virtual-network-functions ubuntu160401ubuntu160401 virtual-cpu count 2
set virtual-network-functions ubuntu160401 memory size 4194304
set virtual-network-functions ubuntu160401 memory features hugepages
#if you configure the VNF from an xml document use the following commands
#set virtual-network-functions myvsrx init-descriptor /var/third-party/ubuntu160401.xml
|
| Install docker | https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-using-the-repository
Docker CE:
-----------
wget "https://download.docker.com/linux/ubuntu/dists/xenial/pool/stable/amd64/containerd.io_1.2.5-1_amd64.deb" -O containerd.io.deb
wget "https://download.docker.com/linux/ubuntu/dists/xenial/pool/stable/amd64/docker-ce-cli_18.09.4~3-0~ubuntu-xenial_amd64.deb" -O docker-ce-cli.deb
wget "https://download.docker.com/linux/ubuntu/dists/xenial/pool/stable/amd64/docker-ce_18.09.4~3-0~ubuntu-xenial_amd64.deb" -O docker-ce.deb
sudo dpkg -i /var/tmp/containerd.io.deb
sudo dpkg -i /var/tmp/docker-ce-cli.deb
sudo dpkg -i /var/tmp/docker-ce.deb
sudo usermod -aG docker seuki
>>>>>>>>>> Logout and log back in <<<<<<<<<<<<
test:
docker ps ( with seuki user account )
|
| Install healthbot | https://www.juniper.net/documentation/en_US/healthbot/information-products/pathway-pages/healthbot-installation-guide.pdf
Download HB:
-------------
wget "https://cdn.juniper.net/software/contrail-healthbot/1.0.1/healthbot-1.0.1.deb?SM_USER=jkriker&__gd84b6d485074f2" -O /var/tmp/healthbot-1.0.1.deb
sudo apt-get install /var/temp/healthbot-1.0.1.deb
|
| sudo healthbot setup |
|
|
| sudo healthbot start |
| healthbot status | healthbot status
labuser@HealthBot3:~$ healthbot status
Name of service Status
---------------------------------------------
alerta Up
api_server Up
debugger Up
gateway Up
grafana Up
hb_proxy_syslog Up
hbmon Up
influxdb_db Up
keycloak Up
license_client Up
mgd Up
postgres Up
redis Up
reports Up
tsdb_shim Up
|
|
|
|
|