revocery old 1- press "SPACE BAR" when asked ( Need to be quick, Just after the "FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.10" paragraph ) 2- at the prompt disable watchdog : loader> watchdog disable 4- loader> type "boot -s" ( in single mode ) 5- Enter recovery mode by typing: /sbin/sh/ recovery 6- at the CLI prompt type: configuration 7- set system root-authen plain-text-password >>> type the new password [ juniper1 ] type: commit and-quit 8- type "exit" and 9- "Reboot the system? [y/n] y " | |
| EX2300-C | |
revovery mode ## Starting application at 0x00000074 ... Consoles: U-Boot console FreeBSD/armv6 U-Boot loader, Revision 1.2 (fbsd-builder@svl-bsdx-05.juniper.net, Fri Aug 26 11:13:00 PDT 2016) DRAM: 2048MB Number of U-Boot devices: 2 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=0 slice=<auto> partition=<auto>... good. | Main Menu 1. Boot [J]unos volume 2. Boot Junos volume in [S]afe mode 3. [R]eboot 4. [B]oot menu 5. [M]ore options Choice: Main Menu 1. Boot [J]unos volume 2. Boot Junos volume in [S]afe mode 3. [R]eboot 4. [B]oot menu 5. [M]ore options Choice: Options Menu 1. Recover [J]unos volume 2. Recovery mode - [C]LI 3. Check [F]ile system 4. Enable [V]erbose boot 5. [B]oot prompt 6. [M]ain menu |