Spaces
Apps
Templates
Create
Juniper Switching
All content
Space settings
Content
Results will update as you type.
•
Switch Drains UP
Getting started
1- Switching Products, Icons, Visio stencils and images
1b- Install , cable the switches
2- Switch Architectures and features
3- Layer 2
4- Layer 3 Configuration
5- Services
6- Other Configuration Example
•
Create and test policy
Example 1: tagged traffic, same vlan both sides
•
Example 2: tagged traffic, different vlan on each side
•
Example 3: tagged traffic: different vlan on each side
•
Example 4: QinQ tunneling in the same switch
•
Example 4: vlan re-write on trunk port
IP Clos config on vQFX and evpn
EVPN and VxLAN: full-2qfx-4srv-evpnvxlan
full-2qfx-4srv-evpnvxlan: only leafs!
•
Example Configuration for VXLAN in QFX5100
•
evpn configuration on QFX10K
•
L2PT and QinQ tunneling
•
LACP for EVPN VXLAN Active-Active Multihoming
Tunneling QinQ Traffic in an EVPN-VXLAN Overlay Network
•
Vlan manipulation at the vlan/ Bridge Domain level
routing-instances on EX and QFX
•
High Availability Features on EX and QFX
7- QOS
8- Mist
9- Competiton
Troubleshooting
Juniper Partners : Power plant
Certification enterprise switching
•
7 and half Security on Switches
Juniper Switching
/
/
IP Clos config on vQFX and evpn
/
EVPN and VxLAN: full-2qfx-4srv-evpnvxlan
Summarize
EVPN and VxLAN: full-2qfx-4srv-evpnvxlan
Jean-luc KRIKER
Owned by
Jean-luc KRIKER
Last updated:
Aug 16, 2020
1 min read
Loading data...
https://github.com/Juniper/vqfx10k-vagrant/tree/master/full-2qfx-4srv-evpnvxlan
Topolofy
Physical and LLDP, SNMP
Â
Expand source
{"serverDuration": 11, "requestCorrelationId": "20dc7e033fa14e9c80b9753c20d96bcd"}
