LDP config and LDP-FRR configuration

Owned by Jean-luc KRIKER
Last updated: Aug 06, 2024
1 min read



LDP config

LDOP config
!
evpn mpls enable
!
router ldp
 router-id <local-loopback>
 inter-area-lsp eth1
 session-protection
 targeted-peer ipv4 <peer-loopback>
  exit-targeted-peer-mode
 targeted-peer ipv4 <peer-loopback>
  exit-targeted-peer-mode
 transport-address ipv4 <peer-loopback>
!
interface ce2
 ip address 192.168.128.5/31
 mtu 9216
 label-switching
 mpls ldp-igp sync ospf
 ip ospf network point-to-point
 enable-ldp ipv4




LDP show commands
show ldp

show ldp adjency






show mpls ldp

show mpls ldp discovery

show mpls ldp neighbor

show mpls ldp session

show mpls ldp fec

More details:

show mpls ldp parameter

show mpls ldp capabilities






https://docs.ipinfusion.com/service-provider/index.html#page/OcNOS-SP/MPLS-Config/LDP-FRR-CONFIG-GUIDE.html



mpls ldp-igp sync ospf holddown-timer 500