Healtbot onboard cisco switch c350
snmp on the swtich | snmp conf term snmp-server enable traps snmp-server community public ro snmp-server community private rw end copy running-config startup-config Test snmpwalk: |
intrface Switch#show ip interface brief | include up GigabitEthernet0/1 unassigned YES unset up up GigabitEthernet0/2 unassigned YES unset up up GigabitEthernet0/48 100.123.231.2 YES manual up up | |
LLDP | LLDP LLDP Configuration: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/46sg/configuration/guide/Wrapper-46SG/swlldp.html#wp1064516 sw1(config)#lldp run sw1#show lldp neighbors Capability codes: (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other Device ID Local Intf Hold-time Capability Port ID Switch Gi0/2 120 Gi0/2 Total entries displayed: 1 sw1#show lldp neighbors Capability codes: (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other Device ID Local Intf Hold-time Capability Port ID Switch Gi0/2 120 Gi0/2 Switch Gi0/1 120 Gi0/1 RES-MSW-1101A Gi0/48 120 B,R 577 Total entries displayed: 3 sw1# |
vlan 1 ip address | vlan ip address VLAN Configuration: --------------------- sw1#show vlan id 1 VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4, Gi0/5, Gi0/6, Gi0/7, Gi0/8, Gi0/9, Gi0/10 Gi0/11, Gi0/12, Gi0/13, Gi0/14, Gi0/15, Gi0/16, Gi0/17, Gi0/18, Gi0/19 Gi0/20, Gi0/21, Gi0/22, Gi0/23, Gi0/24, Gi0/25, Gi0/26, Gi0/27, Gi0/28 Gi0/29, Gi0/30, Gi0/31, Gi0/32, Gi0/33, Gi0/34, Gi0/35, Gi0/36, Gi0/37 Gi0/38, Gi0/39, Gi0/40, Gi0/41, Gi0/42, Gi0/43, Gi0/44, Gi0/45, Gi0/46 Gi0/47, Gi0/49, Gi0/50, Gi0/51, Gi0/52 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 Remote SPAN VLAN ---------------- Disabled Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ sw1# sw1#show running-config interface vlan 1 interface Vlan1 ip address 10.10.1.1 255.255.255.0 end sw2#show running-config interface vlan 1 Building configuration... Current configuration : 59 bytes ! interface Vlan1 ip address 10.10.1.2 255.255.255.0 end |