Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html#id-11662848








Stub Area
set protocols ospf area 0.0.0.7 stub
Totally Stubby AreaA stub area that only allows routes internal to the area and restricts Type 3 LSAs
from entering the stub area is often called a totally stubby area
You can convert area 0.0.0.3 to a totally stubby area by configuring the ABR
to only advertise and allow the default route to enter into the area.
set protocols ospf area 07 stub default-metric 10
only default route:
set protocols ospf area 0.0.0.7 stub default-metric 10
Not-So-Stubby Area or  NSSA


















  • No labels