Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »


Create your own Session Type and Service Class.

You will then apply an already configured Service Class to one of your Service Policies.

Next, you will apply a Traffic Profile to your wan1 interface on your Seattle Branch Router.




Exercise 1Traffic Classification
Step 1Stream Video into your Branch 1 Client




Step 2View Sessions




Step 4Create New Service Class

ADD next to Service Class.

name:  StreamingVideo
DSCP Value: 31 
Choice of Traffic Class or Priority Assignment:  Use Traffic Class for 
Traffic Class to Assign: Medium 
Enable Rate Limiting: true
9. Set 1024 for Maximum Flow Rate
10. Set 2048 for Maximum Flow Burst



Step 3 ( I know )Create New Session Type

ADD next to Session Type

name: RTSP
Change the Session Timeout: 9000000
Select ADD next to Transport:    TCP
port 8554

Service Class: StreamingVideo



Step 5Stream Video into your Branch 1 Client

Maximum Flow Rate:   10000
Maximum Flow Burst:  10000


Step 6Change Rate Limits in the Service Class




Step 7Stream Video into your Branch 1 Client




Step 8View Sessions




Step 9Create Traffic Profile
Authority

ADD next to Traffic Profiles.

Name:  high_preference.
5. Set High to 80.
6. Set Medium to 17.
7. Set Low to 2.
8. Set Best Effort to 1.

seabo1 device interface called wan1



Step 10Stream Video into your Branch 1 Client




Step 11Verify Traffic Engineering




  • No labels